Engine parts

1)SuperFlow heads, ~~1200€~~ 1100€
For 94mm bore
44x37,5 RST Valves
K800 spring
Titan retainers
compustion chamber 48cc
Berg valvecover converter set, you can use stock valvecovers
intakemanifolds DRLA spacing

I have Flow numbers also
Dynoed from 2332cc engine CR 11.0 + FK46 cam + 1,5:1 rockers + MS1 V2.2 fuelinjection, 234hv / 288NM from flywheel.

3) Used FK46 cam + lifters (Scat) ~~120€~~ 100€

4) Throttlebody pair DHLA spacing 48mm 120€
- No throttle plates and axels

5) Throttlebody pair IDA spacing 50mm ~~380€~~ 350€
- about 40 mm high
- self made, needs some kind of throttle stop and Idle control

6) Airfilters 50€
Like these -->http://hotcars.net/p.../big/5943-1.jpg

9)Transmission ~~1300€~~ 1000€
- Stock case
- Aluminium sidecover
- 1-2 gears stock,
- 3 gear 1,51
- 4 gear 1,25
- Finalgear 4,125
- Diiff

10) Petronix Billet jakaja ~~220€~~ 200€
used only for one dyno session and 4 starts at strip.
http://aircooled.fi/...illet-pertronix

Parts are in Finland and sending cost's will be added.

Will take pictures if requested.
Contact with PM or mail markopuikkonen (@) yahoo.com