C.B. high roof Alum case/shuffle pinned/tapped/oil holes/full flow
C.B forged 82mm nitrided crank w/chevy journals
C.B. H-beam rods
Engle cam FK87
CB/SLR lifters
C.B. straight cut gears
Chrome moly lightened flywheel
Moly gland nut
Moly head studs and pushrods
Mahle piston kit/teflon buttons/total seal rings
C.B. #1411-Wedge port/Wedgeport heads/ported,polished 44x37.5
Scat rockers w/stock valve covers
all bearings are german 30mm oil pump w/full flow cover
Deep sump
fully balanced
8.5 compression
Balanced ready to go!
Will have videos of this engine being run in with the full turbo system, should make 350 hp
2800k ovno with front part of the header and outlet for the turbo or the compression can be moved up to 10.1 and you can have a large IDA motor
This engine was built 100% the same as this 10s street car.
The Cal-look Lounge
Author
