The Cal-look Lounge
Welcome, Guest. Please login or register.
Did you miss your activation email?
December 27, 2024, 20:58:19 pm

Login with username, password and session length
Thank you for your support!
Search:     Advanced search
351310 Posts in 28675 Topics by 6859 Members
Latest Member: CarstenK
* Home This Year's European Top 20 lists All Time European Top 20 lists Search Login Register
+  The Cal-look Lounge
|-+  Cal-look/High Performance
| |-+  Cal-look
| | |-+  How much fuel pressure?
« previous next »
Pages: [1] Print
Author Topic: How much fuel pressure?  (Read 2932 times)
typ34vienna
Jr. Member
**
Posts: 85



WWW
« on: May 24, 2012, 14:43:00 pm »

Hey guys,
will mount a new fuel pump with regulator and gauge to my car,
How much psi is the right fuelpressure for the 48IDA carbs?
Logged

richie
Hero Member
*****
Posts: 5696



« Reply #1 on: May 24, 2012, 16:03:22 pm »

Hey guys,
will mount a new fuel pump with regulator and gauge to my car,
How much psi is the right fuelpressure for the 48IDA carbs?

I like to use 3.5/4psi if you are using factory needle and seats,if you use the aftermarket 3.0 glass ball  version then I use less as they bleed over easily
cheers richie
Logged

Cars are supposed to be driven, not just talked about!!!   


Good parts might be expensive but good advice is priceless Wink
JS
Hero Member
*****
Posts: 1628



« Reply #2 on: May 24, 2012, 22:45:34 pm »

Using 3,5psi for years. Would stay away from the glass ball version at all cost.
Logged

Signature.
stealth67vw
Hero Member
*****
Posts: 2261



« Reply #3 on: May 25, 2012, 01:59:07 am »

I've been running 4lbs for a couple months with no problems.
Logged

John Bates
JB Machining Services
1967 street bug 2020lbs w/driver
12.34 @ 108 mph 1/4
7.76 @ 89mph 1/8
John Palmer
Jr. Member
**
Posts: 65


« Reply #4 on: May 25, 2012, 05:20:52 am »

Don't trust the small 0-15# pressure gauges mounted in the heat of the engine compartment, they are not accurate when we expect them to read at the extreme bottom of their range.  Set the regulator pressure with "a real" fuel pump pressure test guage.  If you must use one of the small gauges, turn it over, pop the small rubber plug and drain the liquid.  Then leave it vented "open" to the atmosphere. 
Logged
javabug
Hero Member
*****
Posts: 2103


WHAT'S UP WID DA BOOM BOOM???


« Reply #5 on: May 25, 2012, 12:51:23 pm »

pop the small rubber plug and drain the liquid.  Then leave it vented "open" to the atmosphere.  

That's funny, I was going to run a cheap Summit gauge (for effect) and before it got into the car the plug and oil fell out. I figured that was bad, so I tossed it!

So it was really just trying to help me!
Logged

Mike H.

Sven was right.
JS
Hero Member
*****
Posts: 1628



« Reply #6 on: May 25, 2012, 18:47:34 pm »

You probably did the right thing anyway, I have had many sleepless nights over such a gauge, turned out mine showed different reading with different temperatures in the engine compartment...  Roll Eyes

Installed a proper instrument in the dash with a sender in the back, problem solved.
Logged

Signature.
Pages: [1] Print 
« previous next »
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!