What sized Cooler?

[UltraOrange67-2443]

Hi all.

I'm collecting parts for a 2919cc T1 Motor.

It has a Autolinea block with no cooler in the fan housing.

I'm running the Scat fanhouse and wide cooling fan.

I have a Mocal sandwich plate thermostat and 2 Mocal 19 row 115mm coolers with Spal blow type fans, will they offer enough cooling?

I wanted to fit them on each side of the gearbox area, it is tight due to roll cage and torque bar setup.

Can anyone offer some advice?

Cheers, Nick

[Zach Gomulka]

Far too many variables. Only way to find out is to try it, ad more if needed.

[spoolin70]

I don't know the answer Nick but you might want to add :

1) CR
2) NA or turbo
3) Wet or dry sump
4) do you drive like a mentalist 

Darren

[UltraOrange67-2443]

Engine spec.

90mm Scat flange Crank.
101.6mm JE custom Pistons.
6.0" pauter Rods.
JPM MS250 4" Heads.
JPM 408 Camshaft.
Pauter 1.5:1 roller Rockers.
Twin 48 IDA Throttle bodies.
Crank trigger ignition.
Omex 600 ECU.
Wet sump with 4 quart Berg sump with pickup mod.

Engine builder has talked about 12-13 comp area.

More street than drag.

Cheers, Nick