The Cal-look Lounge
Welcome, Guest. Please login or register.
Did you miss your activation email?
November 25, 2024, 09:37:57 am

Login with username, password and session length
Thank you for your support!
Search:     Advanced search
351218 Posts in 28657 Topics by 6854 Members
Latest Member: 74meanmachine
* Home This Year's European Top 20 lists All Time European Top 20 lists Search Login Register
+  The Cal-look Lounge
|-+  Cal-look/High Performance
| |-+  Pure racing
| | |-+  Kennedy clutch problem.....!!!??		 « previous next »
Pages: [1] Print
Author Topic: Kennedy clutch problem.....!!!??  (Read 10460 times)
FDK/mrpedrini
Full Member
***
Posts: 122



WWW
« on: October 17, 2009, 20:31:47 pm »
Hi fellow loungers...

Today I put my fresh build 2017cc engine in my bug... Engine is assemled with only new parts, and also a new Kennedy stage 2 pressure plate.... when mounting to the flywheel i noticed that the diagraph fingers pointed somewhat to the inside, and when assembled on the gearbox (in the car) I cant feel any pressure at the clutch pedal , even after adjusting clutch cable!!! Huh
Could this be a failure in production, or could there be another explaination?? Maby there is someone who dealed with the same problem...

Dennis...
Logged
Sander/DVK
Hero Member
*****
Posts: 631



WWW
« Reply #1 on: October 17, 2009, 21:31:17 pm »
Hi Dennis, did you remove the ring of the pressure plate? Maybe you have a late model tranny, and you need the extra ring.

Cheers,

Sander

Edit, you can see it on this picture:
« Last Edit: October 17, 2009, 21:33:26 pm by Sander/DVK » Logged
Der Vollgas Kreuzers
nicolas
Hero Member
*****
Posts: 4010
« Reply #2 on: October 17, 2009, 21:41:18 pm »
i think that the plate is preloaded too much by bolting the plate on the flywheel. losen the bolts and you will see the 'fingers' move outwards. this is either due to a too tick plate or maybe the possition of the plate/ flywheel. check the depth you have on the flywheel.
Logged
FDK/mrpedrini
Full Member
***
Posts: 122



WWW
« Reply #3 on: October 18, 2009, 19:24:59 pm »
Quote from: Sander/DVK on October 17, 2009, 21:31:17 pm
Hi Dennis, did you remove the ring of the pressure plate? Maybe you have a late model tranny, and you need the extra ring.

Cheers,

Sander

Edit, you can see it on this picture:


Hi Sander, the ring is out....That ring is for a non guided clutchbearig.... i drive a guided one. Geers... D
Logged
FDK/mrpedrini
Full Member
***
Posts: 122



WWW
« Reply #4 on: October 18, 2009, 19:28:24 pm »
Quote from: nicolas on October 17, 2009, 21:41:18 pm
i think that the plate is preloaded too much by bolting the plate on the flywheel. losen the bolts and you will see the 'fingers' move outwards. this is either due to a too tick plate or maybe the possition of the plate/ flywheel. check the depth you have on the flywheel.
Sounds reasonable....next week end i'm gonna pull out the engine again and take a closer look... And i will order a second Kennedy...just in case..

Kind regards....Dennis
Logged
FDK/mrpedrini
Full Member
***
Posts: 122



WWW
« Reply #5 on: October 21, 2009, 17:55:25 pm »
Today i get the day off, so i dicided to pull out the engine again... took off the kennedy and put an original LUK clutch kit onto it....Put engine back into the car...and.......Same problem..No pressure on the clutch pedal... Engine out again and take LUK off.... Messured Flywheel dept  from friction surface 21mm..... messured an original flywheel 22mm dept!!!!! put 1mm shims between pressure plate and flywheel....looking good. Engine back in the car... GOT PRESSURE!!!!!!!!! Next thing to do is pull the engine out (again) and take flywheel off to some machineguy to take 1mm off......then i'll be good... Grin

Regards, Dennis....
Logged
Harry/FDK
Hero Member
*****
Posts: 3613


Every Rule Was Made To Break, Even Callook...
« Reply #6 on: October 21, 2009, 18:31:53 pm »
I would check the differences in thickness of the friction plates. Never had problems with Kennedy's since they are all german anyway. Just my 2 cents.
Logged
Done ? Not Yet.
FDK/mrpedrini
Full Member
***
Posts: 122



WWW
« Reply #7 on: October 21, 2009, 18:45:30 pm »
Quote from: FDK/Hurry on October 21, 2009, 18:31:53 pm
I would check the differences in thickness of the friction plates. Never had problems with Kennedy's since they are all german anyway. Just my 2 cents.
Hey Harry, I did messured the thickness of 2 different plates. Got one new DAIKEN disc (without springs) and got one new LUK friction plate (from my 1600 engine) , both messure the same thickness..... Also mounted the Kennedy and the DAIKEN to my 1600 flywheel... NO PROBLEM.... guess the chromoly SCAT flywheel isn't machined well like a VW pizza....

Have a nice eve,  Professor.... Wink
Logged
Harry/FDK
Hero Member
*****
Posts: 3613


Every Rule Was Made To Break, Even Callook...
« Reply #8 on: October 21, 2009, 19:09:51 pm »
I didn't know you had a new flywheel..... Did you compare it with a (used) german one ?
Logged
Done ? Not Yet.
FDK/mrpedrini
Full Member
***
Posts: 122



WWW
« Reply #9 on: October 21, 2009, 21:27:07 pm »
Quote from: FDK/Hurry on October 21, 2009, 19:09:51 pm
I didn't know you had a new flywheel..... Did you compare it with a (used) german one ?
Jep, did compare it with 2 german ones. The vw flywheels messure both 22mm depth (messured from the surface where the friction material grabs on and the stair where the pressure plate gets mounted. the Scat flywheel I bought has a depth from 21mm..... so it isn't cut deep enough. Looks like a litle bit, but apperently enough to not let the diafragma get enough preload..... And that counts  both for the Kennedy stage 2 (wich seems perfecly alright)  and a stock LUK clutch kit.. So what do we learn? buy the best and buy VW!!! Grin
Logged
richie
Hero Member
*****
Posts: 5687
« Reply #10 on: October 22, 2009, 16:40:52 pm »
It is not a problem to shim it out to correct the problem,it should be 21.7mm deep,you can just use washers or similar under the pressure plate where the bolts pass through


cheers richie,uk
Logged
Cars are supposed to be driven, not just talked about!!!   


Good parts might be expensive but good advice is priceless Wink
FDK/mrpedrini
Full Member
***
Posts: 122



WWW
« Reply #11 on: October 22, 2009, 21:21:12 pm »
Quote from: richie,uk on October 22, 2009, 16:40:52 pm
It is not a problem to shim it out to correct the problem,it should be 21.7mm deep,you can just use washers or similar under the pressure plate where the bolts pass through


cheers richie,uk
Hey Richie, that's what i've did right now using some normal M8 closed plates.... can I leave them in or should I replace them with something that fills the whole area between pressure plate and flywheel? (I'm a bit worried that the pressure plate doesn't contact like it normally would do) Huh Wink Thanks anyway....Dennis
Logged
richie
Hero Member
*****
Posts: 5687
« Reply #12 on: October 23, 2009, 06:16:06 am »
Yes that will be fine,I have run plenty of clutches set up like this

cheers richie,uk
Logged
Cars are supposed to be driven, not just talked about!!!   


Good parts might be expensive but good advice is priceless Wink
Jason Foster
Hero Member
*****
Posts: 1255


7.69 87mph 12.35 106 mph


WWW
« Reply #13 on: November 09, 2009, 05:57:55 am »
Quote from: richie,uk on October 23, 2009, 06:16:06 am
Yes that will be fine,I have run plenty of clutches set up like this

cheers richie,uk


  Well there's your problem!!! It's the extra weight of those washers causing all those wheelies! You really don't need bars.
Logged
STRENGTH THROUGH JOY...........

Der Kleiner Panzers
Sander/DVK
Hero Member
*****
Posts: 631



WWW
« Reply #14 on: November 15, 2009, 18:26:48 pm »
Hey Dennis, how are your engine doing now? Is it running yet?
Logged
Der Vollgas Kreuzers
FDK/mrpedrini
Full Member
***
Posts: 122



WWW
« Reply #15 on: November 15, 2009, 23:37:32 pm »
Quote from: Sander/DVK on November 15, 2009, 18:26:48 pm
Hey Dennis, how are your engine doing now? Is it running yet?



Hi Sander, engine is running verry well Wink. clutch problem solved.... All i need now is some good weather to take the car out.....and some cashflow to buy a decent tranny Grin....
Logged
Sander/DVK
Hero Member
*****
Posts: 631



WWW
« Reply #16 on: November 16, 2009, 23:12:59 pm »
Cool! Do you have a little movie to share?  Smiley
Logged
Der Vollgas Kreuzers
FDK/mrpedrini
Full Member
***
Posts: 122



WWW
« Reply #17 on: November 17, 2009, 19:06:45 pm »
Quote from: Sander/DVK on November 16, 2009, 23:12:59 pm
Cool! Do you have a little movie to share?  Smiley
Not jet, still wanted to do that.....and when i have one i hope i can put it on the lounge....it's even difficult to post pict's to me Undecided....have some pictures posted on www.rayfdk.blogspot.com How is your car and engine doing Sander?? grtz D
Logged
Eddie DVK
Hero Member
*****
Posts: 867
« Reply #18 on: November 17, 2009, 22:27:08 pm »
Quote from: FDK/mrpedrini on November 17, 2009, 19:06:45 pm
Quote from: Sander/DVK on November 16, 2009, 23:12:59 pm
Cool! Do you have a little movie to share?  Smiley
Not jet, still wanted to do that.....and when i have one i hope i can put it on the lounge....it's even difficult to post pict's to me Undecided....have some pictures posted on www.rayfdk.blogspot.com How is your car and engine doing Sander?? grtz D

He Dennis how are you doing, cool pictures on there, engine looks very good. how is it running.
Say hi to madman Ray for me...

Kind Regards Edgar
Logged
Regards Edgar

" Type 4, it is a completely different engine. You have to drive one to understand! "
Sander/DVK
Hero Member
*****
Posts: 631



WWW
« Reply #19 on: November 18, 2009, 00:01:52 am »
Mr speedwell have made a Sticky how to post pictures. You can do it  Wink http://cal-look.no/lounge/index.php/topic,3632.0.html

My car and engine are gone.. a while ago. I have started on a new project. I will post some update's soon on the dutch callook forum.
Logged
Der Vollgas Kreuzers
FDK/mrpedrini
Full Member
***
Posts: 122



WWW
« Reply #20 on: November 18, 2009, 18:16:02 pm »
Quote from: Eddie on November 17, 2009, 22:27:08 pm
Quote from: FDK/mrpedrini on November 17, 2009, 19:06:45 pm
Quote from: Sander/DVK on November 16, 2009, 23:12:59 pm
Cool! Do you have a little movie to share?  Smiley
Not jet, still wanted to do that.....and when i have one i hope i can put it on the lounge....it's even difficult to post pict's to me Undecided....have some pictures posted on www.rayfdk.blogspot.com How is your car and engine doing Sander?? grtz D

He Dennis how are you doing, cool pictures on there, engine looks very good. how is it running.
Say hi to madman Ray for me...

Kind Regards Edgar
heey Mr Ed Wink I'm doing fine...only have to spend to much time on non vw stuff Cheesy.. Engine runs great, revs till 7500 rpm, wich is supprising because i build it on the mild side... not the fastest engine i believe....but hot enough to scare some plastic bombers Cool.. How are you and the type 4 doing?? nice to hear from you!!!
Logged
FDK/mrpedrini
Full Member
***
Posts: 122



WWW
« Reply #21 on: November 18, 2009, 18:18:45 pm »
Quote from: Sander/DVK on November 18, 2009, 00:01:52 am
Mr speedwell have made a Sticky how to post pictures. You can do it  Wink http://cal-look.no/lounge/index.php/topic,3632.0.html

My car and engine are gone.. a while ago. I have started on a new project. I will post some update's soon on the dutch callook forum.
Thnx Sander, ill give it a try... Grin What kind off car are you working on??....(i'll check the dutch forum) grts D
Logged
Eddie DVK
Hero Member
*****
Posts: 867
« Reply #22 on: November 18, 2009, 22:38:39 pm »
Quote from: FDK/mrpedrini on November 18, 2009, 18:16:02 pm
Quote from: Eddie on November 17, 2009, 22:27:08 pm
Quote from: FDK/mrpedrini on November 17, 2009, 19:06:45 pm
Quote from: Sander/DVK on November 16, 2009, 23:12:59 pm
Cool! Do you have a little movie to share?  Smiley
Not jet, still wanted to do that.....and when i have one i hope i can put it on the lounge....it's even difficult to post pict's to me Undecided....have some pictures posted on www.rayfdk.blogspot.com How is your car and engine doing Sander?? grtz D

He Dennis how are you doing, cool pictures on there, engine looks very good. how is it running.
Say hi to madman Ray for me...

Kind Regards Edgar
heey Mr Ed Wink I'm doing fine...only have to spend to much time on non vw stuff Cheesy.. Engine runs great, revs till 7500 rpm, wich is supprising because i build it on the mild side... not the fastest engine i believe....but hot enough to scare some plastic bombers Cool.. How are you and the type 4 doing?? nice to hear from you!!!

Good to hear engine is running great.
Typ 4 is comming along ok, still waiting on some small parts but have ''try fitted'' it and everything seems to fit.
I have some pictures, will post them on here soon.

Kind Regards Edgar
Logged
Regards Edgar

" Type 4, it is a completely different engine. You have to drive one to understand! "
Pages: [1] Print 
« previous next »
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!