original empi 5 spoke on front CSP brake kit

[empicolector]

Hye
I try to fit my original EMPI 5 spoke on CSP front brake kit
and he doesn't fit
the brake caliper is too big and he is in contact with the inside of the wheel
help needed
who use the same configuration

[Lt Charbon]

I use the same config and no problem. I have the CSP wide 5 kit for CB dropped spindle (made for drum brakes).
It's close but the caliper is not in contact with the wheel.

I take picture when I go to the garage...

[Peter]

just grind the caliper a bit?
its done before

[empicolector]

I use the same config and no problem. I have the CSP wide 5 kit for CB dropped spindle (made for drum brakes).
It's close but the caliper is not in contact with the wheel.

I take picture when I go to the garage...

with the big opel caliper
its second generation of 5 spokes with little wing inside to cool the drum brake

[Lt Charbon]

I have exactly the same wheels, with the vent wing inside.

Don't know if they're opel caliper but these are the one from the kit I bought 6 month ago, the same as the one showed in vw tech 19 pg 43 (sorry for the advert...).
The brand seems to be DELCO.

[speedwell]

I have exactly the same wheels, with the vent wing inside.

Don't know if they're opel caliper but these are the one from the kit I bought 6 month ago, the same as the one showed in vw tech 19 pg 43 (sorry for the advert...).
The brand seems to be DELCO.

laurent  1st or 2nd generation are the same    vent wing inside each models , the only thing who change that there's 1 ribs behind the spokes of a first generation and 3 ribs on the second generation
check 

[Lt Charbon]

Thanks for the precision, I'll have a look when I'll change the tyres...