The Cal-look Lounge
Welcome, Guest. Please login or register.
Did you miss your activation email?
November 28, 2024, 15:53:01 pm

Login with username, password and session length
Thank you for your support!
Search:     Advanced search
351225 Posts in 28657 Topics by 6854 Members
Latest Member: 74meanmachine
* Home This Year's European Top 20 lists All Time European Top 20 lists Search Login Register
+  The Cal-look Lounge
|-+  Cal-look/High Performance
| |-+  Cal-look
| | |-+  another beam/dropped spindle question....		 « previous next »
Pages: [1] Print
Author Topic: another beam/dropped spindle question....  (Read 3214 times)
beetletom
Hero Member
*****
Posts: 1686
« on: March 08, 2010, 18:13:33 pm »
is it ok to run cb dropped spindles on a stock width beam with adjusters
running on 66 steels and 135/70 tyres?
Logged
gizago
Full Member
***
Posts: 188
« Reply #1 on: March 08, 2010, 20:06:13 pm »
You running drums, or a disc conversion?? The spindles will push the track out a bit, but with 135's you should get away with it if you're still on drums, if you dont go too low.
Logged
beetletom
Hero Member
*****
Posts: 1686
« Reply #2 on: March 08, 2010, 20:13:57 pm »
yep, still wide 5 drums
thanks!
Logged
Zach Gomulka
Hero Member
*****
Posts: 6991


Don't piss down my back and tell me it's raining.
« Reply #3 on: March 08, 2010, 21:19:59 pm »
You *should* be ok as long as you don't crank the beam down too far.
Logged
Born in the '80s, stuck in the '70s.
Bryan67
Hero Member
*****
Posts: 1133
« Reply #4 on: March 09, 2010, 04:51:54 am »
Plus with stock wheels you will have no problems either.
Logged
If you`re going to do something, do it right.
mcmscott
Jr. Member
**
Posts: 60
« Reply #5 on: March 09, 2010, 05:40:57 am »
Quote from: Bryan67 on March 09, 2010, 04:51:54 am
Plus with stock wheels you will have no problems either.
[/

Don't you have anything better to do? ;)quote]
Logged
Rennsurfer
Hero Member
*****
Posts: 7391


D.B.O. Not a club; a state of mind.
« Reply #6 on: March 09, 2010, 05:48:29 am »
Quote from: beetletom on March 08, 2010, 18:13:33 pm
is it ok to run cb dropped spindles on a stock width beam with adjusters
running on 66 steels and 135/70 tyres?

You'll be fine if you're running drums. I'm running the C.B. two and half inch drop spindles and have had Flat Four BRM and four and a half 356 wheels with both 135 & 145 tires with zero rubbing or any problems.
Logged
"You can only scramble an egg so many ways."
~Sarge
Bryan67
Hero Member
*****
Posts: 1133
« Reply #7 on: March 09, 2010, 14:32:29 pm »
Quote from: mcmscott on March 09, 2010, 05:40:57 am
Quote from: Bryan67 on March 09, 2010, 04:51:54 am
Plus with stock wheels you will have no problems either.
[/

Don't you have anything better to do? ;)quote]

Don`t you?
Logged
If you`re going to do something, do it right.
beetletom
Hero Member
*****
Posts: 1686
« Reply #8 on: March 09, 2010, 15:06:58 pm »
thanks guys!  Cool
Logged
Pages: [1] Print 
« previous next »
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!