Scat flange crank flywheel bolt Q

[RMS Boxer Service]

Hi

I need to know the lenght of the flywheel bolts for a Scat flange crank. It's a 8 bolt crank.

I got some but the threads are only 0.725" long and that's seems too short to me, but I might be
wrong. The threads are app 19 mm deep into to crank and the flwheel bolts only goes 9 mm
into the crank threads, not enough in my opinions.

What bolt lenght are are you using on your Scat crank??


/Rolf

[dangerous]

There is not a lot of room to put a deep thread.
You need to wind in a bolt by hand,
and measure the remaining gap unde the head.
It is important that it actually clamps the flywheel against the face.