Cam ID

[Torben Alstrup]

Hello
Last night I got a cam in my hands that I could not identify.
The cam is VERY wide on the upper egg part, but only lifts 8,4 - 8,5 mm on the cam.

The ID stamp at the gear end says: H G 3.

I take it that it is an old grind, most likely Swedish or Finnish, as the engine had a lot of trimco stuff and an old design oil pump that resembles a Nickerson (32 mm gears) but has better finish than the Nickersons normally had.

Let me hear ya !

Torben