Valve angle in CB competition eliminators

[Tobi/DFL]

Hi!

I want to cut valve pockets in my pistons. Does anybody know the correct angle of the valves in a CB competition eliminator head?

Thanks!

Tobi

[dangerous]

Always double check YOUR valve location and angle,
but it should be close to 9 degrees.

[TexasTom]

I thought T1s used an 8* valve angle, or was that for the T2/4?

[Martin]

last set i measured were 9.5 deg

[Tobi/DFL]

Thanks everybody!

I measured mine with just a little more than 9 degrees so that should be right.
Now the fun part begins...

Tobi

[Type1/DVK]

and anyone that knows the original or 044 heads? the same? thanks

[Roman]

The stock, 041 and 044 heads has 9.5 degrees (or as it says in the stock manual, 9 degrees 30 minutes).