The Cal-look Lounge
Welcome, Guest. Please login or register.
Did you miss your activation email?
November 24, 2024, 18:56:26 pm

Login with username, password and session length
Thank you for your support!
Search:     Advanced search
351212 Posts in 28657 Topics by 6854 Members
Latest Member: 74meanmachine
* Home This Year's European Top 20 lists All Time European Top 20 lists Search Login Register
+  The Cal-look Lounge
|-+  Cal-look/High Performance
| |-+  Pure racing
| | |-+  Anyone heard about Diamond-like Carbon coatings?		 « previous next »
Pages: [1] Print
Author Topic: Anyone heard about Diamond-like Carbon coatings?  (Read 3414 times)
alex d
Hero Member
*****
Posts: 1035
« on: March 30, 2011, 14:34:04 pm »
reading about abarth engines and tuners trying to squeeze every hp from those tiny engines this coatings came up, apparently they are the shizznits! anyone tried them in an aircooled VW?
Logged
robkong
Newbie
*
Posts: 11
« Reply #1 on: March 31, 2011, 00:18:12 am »
Yes it's great. I have been using  dlc coating on my piston pin's for the past 3 yrs.When ever i tear the motor down for inspection the pin's looks great and slide right out of the piston.
Logged
Airspeed
Hero Member
*****
Posts: 593
« Reply #2 on: March 31, 2011, 21:12:50 pm »
Yes, same experience here: Piston pins, rocker shafts and lifters  Wink
Logged
"...these cars were preferred by the racers because the strut front suspension results in far superior handling than the regular torsion bar front end..."  - Keith Seume.
10.58 @ 130 mph (2/9/2022 Santa Pod)
Frallan
Hero Member
*****
Posts: 933
« Reply #3 on: April 02, 2011, 02:24:32 am »
So who is doing your coatings?
How do you treat the parts prior to sending for coating. If I am not wrong they are pretty strong on fully chamfered and fully polished.
I know they do take some second hand parts but oil is nothing they like.
What are the costs?

Anyone remember this one?
http://www.shoptalkforums.com/viewtopic.php?f=15&t=71061&p=482421&hilit=diamond+like+coating#p482421
Logged
Some of my cars: http://www.shoptalkforums.com/viewtopic.php?t=116265
Airspeed
Hero Member
*****
Posts: 593
« Reply #4 on: April 03, 2011, 13:11:31 pm »
Quote from: Frallan on April 02, 2011, 02:24:32 am
How do you treat the parts prior to sending for coating. If I am not wrong they are pretty strong on fully chamfered and fully polished.
Surfaces are superfinished prior to.
Logged
"...these cars were preferred by the racers because the strut front suspension results in far superior handling than the regular torsion bar front end..."  - Keith Seume.
10.58 @ 130 mph (2/9/2022 Santa Pod)
red baron
Full Member
***
Posts: 133



WWW
« Reply #5 on: April 04, 2011, 10:07:42 am »
There is a company here is germany, where I sent some parts.

http://www.kexel.de/dlcbeschichtung.htm

It is really expensive but works. You could try to contact them.
Logged
Udo
Hero Member
*****
Posts: 2077
« Reply #6 on: April 04, 2011, 19:47:28 pm »
I would recommend ceramic coating ...
Logged
www.Udobeckertuning.de
Pages: [1] Print 
« previous next »
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!