Berg 4 quart studs.

[Taylor]

    So I have an old Berg 4 and can't find studs for it. Aside from the cheesy factor and the fact that the material is usually softer, are there any other downfalls to using all thread? Taylor

[Jason Foster]

Have you called Berg?

[Frenchy Dehoux]

     Taylor let me know if you can not locate them how many do you need. Do you need the sleeves for them.

     Frenchy

[deano]

Try using bolts instead of studs. Thread them from the case, down, and from inside the sump, down. A little tricky tightening them from inside, but I feel it is a much stronger setup than 6mm studs.

[Lids]

Try using bolts instead of studs. Thread them from the case, down, and from inside the sump, down. A little tricky tightening them from inside, but I feel it is a much stronger setup than 6mm studs.

As above

[Taylor]

I would do that as it would make taking the sump plate easier but the sleeves are lodged in there pretty good.  I would like to find some studs but I'm not against all thread as the torque is only like 10 lbs.

[DKK Ted]

Taylor, call Berg, they have the older hardware. If you want to stay original. Talk to Mark V.

Ted

[Taylor]

Thanks guys ill try Berg Monday. I was told when I ordered a pick up tube that they didn't think they still had them.

[DKK Ted]

The last time I talked to Mark they had'em. I needed a set for somebody but they changed there mind.

Ted

[stealth67vw]

I talked to Tim about a year ago and he told me they had none and they would not be making any.