My Next Project, 63 Notch

[Speed-Randy]

Just got back from a 13 hour drive. Left at 3 am. Snapped one picture, right after loading it on the trailer, so I will post this up. Now I am going to bed.

[nicolas]

this could be a very nice project, but if you bought it as a 64 you might need to bring it back as it is a 4 lug car and that is 66 or 67 if it doesn't have a external fuelflap... but in my humble opinion 66's and 67's look better 

[Speed-Randy]

It's 4 lug because the PO put 4 wheel disc brakes on it with 4/130 rotors. I am going to change these to 5/130 if you get my drift here. Today I sorted thru about 10 boxes of parts and everything is here, I should have it in epoxy primer in the next 2 weeks, still have to remove fenders and metal prep everything as he also left it exposed after media blasting so it has a very light coat of surface rust. Should have ir off the pan in a day or so

[danny gabbard]

You need counciling !!! Your have the vw withdrals .

[Speed-Randy]

Withdrawls my ass!!!! I've got 5 of them in the garage now, and 3 outside. More like overdose!!! by the way, I have a baja body and doors I'm giving away if anybody needs one, could be used as a drag car with wing box as well. I also picked up a fastback yesterday for a few peices of sheet metal that I need. It has a pan, pink, and body tag. Plus a few parts If anybody needs switches or sheet metal peices that I wont be using

[low oval]

I think you need counceling.

[team97]

I think you need counceling.

And a lot of it!!!!!