The Cal-look Lounge
Welcome, Guest. Please login or register.
Did you miss your activation email?
November 24, 2024, 09:22:59 am

Login with username, password and session length
Thank you for your support!
Search:     Advanced search
351211 Posts in 28657 Topics by 6854 Members
Latest Member: 74meanmachine
* Home This Year's European Top 20 lists All Time European Top 20 lists Search Login Register
+  The Cal-look Lounge
|-+  Cal-look/High Performance
| |-+  Pure racing
| | |-+  90.5 X 69 JE or Weisco's ?
« previous next »
Pages: [1] Print
Author Topic: 90.5 X 69 JE or Weisco's ?  (Read 2630 times)
K-Roc
Full Member
***
Posts: 194


« on: October 20, 2011, 03:37:54 am »

Hi just wondering if anyone has ordered or has seen a good forged piston with the 39.6 mm Compression height ( or close to the "A" Style compression height )

I have a customer that want some real RPM's......

Gonna give JE a shout tomorrow but was hoping someone has already been through this can throw me a bone.....

Cheers,

Darren

P.S. I know I could use the B style but the motor would be so damm narrow the carbs won't clear the fan shroud with out a ton o work....
Logged
Shag55
Full Member
***
Posts: 220

Shag Leone, SL-1racing


« Reply #1 on: October 20, 2011, 04:59:58 am »

Hey Darren, call Nato at bros machine shop. He's ordered JE and CPs. The CPs would be my choice. I have a set of them in 92mm for my next build. They are nice!
Logged

325hp and 290# torque @17psi on 91 pump
383hp and 324# torque @23psi on 50/50 mix
Shag55.sl1racing@gmail.com
Facebook at SL 1 racing
Taylor
Hero Member
*****
Posts: 577



« Reply #2 on: October 21, 2011, 00:44:34 am »

Hey Darren,  I'm interested in your build!! If your going custom maybe try JE/weisco. If you want cp you have to go through a dealer,  not the case with the others I don't think.
Logged
Torben Alstrup
Hero Member
*****
Posts: 716


« Reply #3 on: October 21, 2011, 08:55:33 am »

Darren.
2 things.
My choice would definitely be JE´s, as they are about 50 gr. lighter than the counterpart. AND you can get JE´s with 1 or 1,25 mm top rings.
Next. You may want to consider lowering the pin height, eventhough it "creates" some machine work on the cylinders. You can reduce the piston rattle significantly and thereby free up more hp, by doing that.

T
Logged
Pages: [1] Print 
« previous next »
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!