Typ3 rear drum up-grade

[zaza1]

hi, i don't understand a type different setting http://airkewld.com/products-page/drum-kits/5x4-75-rear-drum-kit-longirs-spline/ and that part http://airkewld.com/products-page/drum-kits/5x4-50-rear-drum-kit-longirs-spline/

who's a different size 4.50 or 4.75.

i have a original trasmission.You bought this change for the attack 4x130 or modify the original rear drum?



my work in progress http://recidivo.tumblr.com

[richie]

hi, i don't understand a type different setting http://airkewld.com/products-page/drum-kits/5x4-75-rear-drum-kit-longirs-spline/ and that part http://airkewld.com/products-page/drum-kits/5x4-50-rear-drum-kit-longirs-spline/

who's a different size 4.50 or 4.75.

i have a original trasmission.You bought this change for the attack 4x130 or modify the original rear drum?



my work in progress http://recidivo.tumblr.com

The 1st kit is for Chevrolet stud pattern wheels [5x 4.75] and the 2nd is for USA ford stud pattern wheels [5x4.50]  You can buy late type 3 drums in 4x130 and just have them machined to fit the early short axle

cheers Richie

[zaza1]

Tanks Richie 

[nicolas]

hi, i don't understand a type different setting http://airkewld.com/products-page/drum-kits/5x4-75-rear-drum-kit-longirs-spline/ and that part http://airkewld.com/products-page/drum-kits/5x4-50-rear-drum-kit-longirs-spline/

who's a different size 4.50 or 4.75.

i have a original trasmission.You bought this change for the attack 4x130 or modify the original rear drum?



my work in progress http://recidivo.tumblr.com

The 1st kit is for Chevrolet stud pattern wheels [5x 4.75] and the 2nd is for USA ford stud pattern wheels [5x4.50]  You can buy late type 3 drums in 4x130 and just have them machined to fit the early short axle

cheers Richie

yep. maybe good to point out that the later drums on a type3 are a two piece design. you have the actuall brake/drum and a rotor with the boltpatern. you need both. and the hub/rotor is shortened to fit short axles.

[zaza1]

change all the braking system so  ... but these already offering complete kits and do not go well?

[UltraOrange67-2443]

I found wide 5 T3 rear brakes on a Karmann ghia I'm working on, they had long axles.
I fitted short race axles & tubes but had the new drum snout machined down to suit.
You can fit a late T3 rotor and drum and do the same if the axles you have are short.