Two options for IRS, original ZF diff or Quaife torque biasing diff.
Quaife- don't know of the availability of these anymore, contact a good trans shop about this.
ZF- do yourself a favor and just buy one from Bruce Tweddle- he scours Central America to find them, digs them out of rotting cars, brings them back to Canada, and goes through them so they are PERFECT when you buy one. Even if you are able to find one, you're rolling the dice on it being good. I have one in my old type 1 trans with many years/miles/dragstrip passes on it and never had an issue with it.
Hope this was some help.
Thanks for this. Just been looking and a Quaife is avail on their own site:
http://quaife.co.uk/shop/search/results/taxonomy:488 It is gonna cost... but they do offer a lifetime warranty.. Sounds dubious but if true (Says subject to Ts&Cs..), then it's suddenly NOT that expensive.
Their FAQ seems to hint that once bought, then everything around it will break but the Diff will take
"just about as much horsepower as you can throw at it. In almost any given transmission or rear axle, the QUAIFE ATB Differential will not be the limiting factor."
I keep hearing that eventually I'll break my diff and a Super Diff will help that as it has 4 spider gears.
What does a Super Diff give me other than 2 extra spider gears for strength? will it still not deliver the power in the correct fashion and end up spinning one wheel?
you could contact Jussi here on the lounge or
www.kuplapaja.com, he has the "old" version limited slip with discs but in all new construction, both for 33 or 37 splines, cheers
Friendly Dimitrios
I just tried to look on that website and it's all in Finnish.. My finnish is limited to Zero.. :-) I did find it amusing tho' that they also own a Herbie. Just like my car is.
Also, How do I contact Bruce Tweddle? I'm interested to see how much a rebuilt ZF will cost against the Quaife. Obviously the downside to that style is the plates will wear and it needs servicing but a Quaife is a Fit and forget item.
Tho' I like the idea of the 37 spline so the larger CVs can be used, but does this mean it will only fit a T2 box? or will it fit inside a 1302/1303 box?