The Cal-look Lounge
Welcome, Guest. Please login or register.
Did you miss your activation email?
November 27, 2024, 04:12:26 am

Login with username, password and session length
Thank you for your support!
Search:     Advanced search
351224 Posts in 28657 Topics by 6854 Members
Latest Member: 74meanmachine
* Home This Year's European Top 20 lists All Time European Top 20 lists Search Login Register
+  The Cal-look Lounge
|-+  Cal-look/High Performance
| |-+  Pure racing
| | |-+  48ida's with stock Fuel Pump??
« previous next »
Pages: [1] Print
Author Topic: 48ida's with stock Fuel Pump??  (Read 7025 times)
Frank LUX
Hero Member
*****
Posts: 1886


Back...Soon...hopefully!!!


WWW
« on: April 28, 2014, 20:41:55 pm »

Anyone running Ida's while keeping stock Original Fuel Pump?

Pictures wanted!!!!

Frank
Logged

1960 Ragtop, 2332cc, 48 IDA's, Joe Hunt Magneto, someday it will be back...
1953 Split Window, 1799cc, 48 IDA's, Don Zig Magneto,  OG BRM's...in da works...
SumFun Racecar, 2332cc, 48 IDA's, Magneto
Jim Ratto
Hero Member
*****
Posts: 7121



« Reply #1 on: April 28, 2014, 20:53:17 pm »

Sarge does. Sorry I don't have a picture right now. Jim Kurlinski's green car too.
Logged
BeetleBug
Hero Member
*****
Posts: 2836


Snabba grabben...


« Reply #2 on: April 28, 2014, 20:54:04 pm »

Anyone running Ida's while keeping stock Original Fuel Pump?

Pictures wanted!!!!

Frank

Absolutely no problem Frank. We have 11 second street cars using the original pump and the original fuel line, believe it or not. The problem with the original pump is the high pressure and in most cases you will have to use a regulator. Or you can do it the hard way, shim it out to you have the pressure you want. Sorry, no pictures.

-BB-
Logged

10.41 - 100ci - 1641ccm - 400hp
Rick Meredith
DKK
Hero Member
*****
Posts: 5312


We can't force ya to have fun


« Reply #3 on: April 28, 2014, 21:05:05 pm »

Ran my 1776 with 48s and a stock pump. BB is right though, you need to drop the pressure down either with a regulator or shimming the pump.
Logged

67 Beetle - The Deuce Roadster of Cal Look
neil68
Hero Member
*****
Posts: 538



« Reply #4 on: April 30, 2014, 02:52:42 am »

Anyone running Ida's while keeping stock Original Fuel Pump?

Pictures wanted!!!!

Frank

I ran my 2332 cc with IDA's for several years on stock fuel line and stock-style pump until last year (photo below).  I switched to a Carter rotary pump last year, with no improvement...still running high-12's in the 1/4-mile at 106 MPH (170 KM/H).  I'm going to try 9.5 mm (3/8") fuel lines next:

Logged

Neil
Der Kleiner Rennwagens
'68 Beetle, 2332 cc, 204 WHP
12.5 seconds @ 172 KM/H (107.5 MPH)
Dynojet Test:  https://www.youtube.com/watch?v=M9B_H3eklAo
Sam K
Hero Member
*****
Posts: 746



« Reply #5 on: April 30, 2014, 18:15:05 pm »

I ran a stock fuel pump and line with IDA's on my '63 last year. It ran fine on the street but would run out of gas at the track right at about the 1000 foot mark. I upgraded to a holley red and 1/2 inch line last week. I'm taking it to the track on Friday to find out if it helped.
Logged
Black Sheep
Hero Member
*****
Posts: 2693


less is more


« Reply #6 on: April 30, 2014, 20:04:51 pm »

I ran a low 13 on a STD pump with my IDA's bolted to a 2165 , but run a pressure regulator  Wink
« Last Edit: April 30, 2014, 20:06:33 pm by Black Sheep » Logged

Stick with what you know works .
13.03 @ 98mph
Frank LUX
Hero Member
*****
Posts: 1886


Back...Soon...hopefully!!!


WWW
« Reply #7 on: April 30, 2014, 20:56:47 pm »

Thanxs for the info's guys!!!!

Frank
Logged

1960 Ragtop, 2332cc, 48 IDA's, Joe Hunt Magneto, someday it will be back...
1953 Split Window, 1799cc, 48 IDA's, Don Zig Magneto,  OG BRM's...in da works...
SumFun Racecar, 2332cc, 48 IDA's, Magneto
glenn
Hero Member
*****
Posts: 639



WWW
« Reply #8 on: April 30, 2014, 21:51:26 pm »

2180 with dual IDAs and stock pump.

I can tell you there is a limit to the volume of fuel it can supply. From a rolling start with my foot to the floor, shifting at 6500rpm the carbs run dry at 105mph, that's about 5000 rpm in 5th gear (0.82 5th and 3.875 r/p).

It's fine for street but if you plan to race you need a electric pump.

Logged

Glenn
74 Beetle Specs | 74 Beetle Restoration | 2180cc Engine
"You may not get what you pay for, but you always pay for what you get"

Restored Bosch Cast Iron Distributors

www.DasVolks.com
Long Island's Aircooled Club
RIP356
Full Member
***
Posts: 112


« Reply #9 on: May 01, 2014, 08:46:15 am »

How about an electric pump but the standard metal line through the tunnel. Would that be OK  for a 2276 with 45's?
Thanks
Logged
BeetleBug
Hero Member
*****
Posts: 2836


Snabba grabben...


« Reply #10 on: May 01, 2014, 09:01:19 am »

How about an electric pump but the standard metal line through the tunnel. Would that be OK  for a 2276 with 45's?
Thanks

Yes, no problem.
Logged

10.41 - 100ci - 1641ccm - 400hp
henk
Hero Member
*****
Posts: 654


« Reply #11 on: May 01, 2014, 10:25:28 am »

How about an electric pump but the standard metal line through the tunnel. Would that be OK  for a 2276 with 45's?
Thanks

That's what i have on my 2110 with 48 ida.
And no probleme.

Henk!!!
Logged
Jeff68
Sr. Member
****
Posts: 394


« Reply #12 on: May 01, 2014, 17:25:08 pm »

On my 2110 with stock pump 48 IDa's - K10 cam etc....My results are the same as Glenn's. On sustained high speed runs (100 + mph) I had fuel supply problems. On the street - light to light and cruising no problem. You can do short bursts but I don't think you can do long high rpm / power situations.
Logged
aussie
Newbie
*
Posts: 12


« Reply #13 on: May 16, 2014, 13:25:51 pm »

Can you run a stock fuel pump  (the sealed ones for alternators) with a billet msd dizzy or will there be clearance issues? Pics?
Logged
Steve D.
Full Member
***
Posts: 204


« Reply #14 on: May 16, 2014, 17:43:12 pm »

It fits, might need slight filing depending on the manufacturer of the pump.
Logged

Über Alles

5 tracks, 5 days, 1000+ miles.
10.77 avg. on pump fuel.
238I
neil68
Hero Member
*****
Posts: 538



« Reply #15 on: May 16, 2014, 22:13:18 pm »

Can you run a stock fuel pump  (the sealed ones for alternators) with a billet msd dizzy or will there be clearance issues? Pics?

It depends on which "stock fuel pump" you have.  Some of the common ones which have a side exit fuel line will interfere with the MSD.  I swapped to a Brosal OEM style with the top (vertical) exit fuel line and all was well...see my photo above.
Logged

Neil
Der Kleiner Rennwagens
'68 Beetle, 2332 cc, 204 WHP
12.5 seconds @ 172 KM/H (107.5 MPH)
Dynojet Test:  https://www.youtube.com/watch?v=M9B_H3eklAo
benssp
Hero Member
*****
Posts: 1655


www.callookvw.com


WWW
« Reply #16 on: May 20, 2014, 18:55:41 pm »

My bus has 44's and a stock pump, Ivan's beige '67 has a stock pump & Ida's  Smiley
Logged

www.vwheritage.com  My Job
www.bernardnewbury.co.uk My Team
any work related enquiries to ben@vwheritage.com PM's about work will not be answered Cheesy

Bitburg Motor Boat Club Founder Member

YMCA
nicolas
Hero Member
*****
Posts: 4010



« Reply #17 on: May 20, 2014, 20:19:07 pm »

my 2276 fK8 engine with 48 dellortos ran great with a stock fuel pump. i had no issues on highway cruises or runs. worked great and actually no hassle.
Logged
glenn
Hero Member
*****
Posts: 639



WWW
« Reply #18 on: May 20, 2014, 23:12:02 pm »

I've been told that the stock pump can be used to about 175hp. After that you need a electric due to the higher volume.
Logged

Glenn
74 Beetle Specs | 74 Beetle Restoration | 2180cc Engine
"You may not get what you pay for, but you always pay for what you get"

Restored Bosch Cast Iron Distributors

www.DasVolks.com
Long Island's Aircooled Club
Fritter
Hero Member
*****
Posts: 625



« Reply #19 on: May 21, 2014, 18:14:11 pm »

I run stock fuel pump with 48's, fuel pump shimmed to correct pressure of course.  My car is mainly a street car, and I strive to keep the mods to the early 70s timeframe, that's a lot of the fun of having one of these cars IMHO.

If more race, I'd go electric. 
Logged

Mike F.
'64 Indigo Blue sunroof Bug
Pages: [1] Print 
« previous next »
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!