Pics of lookers on 14" fuchs?

[Jos]

I've got a set of 14" Fuchs in the garage and wanted to see if anyone has pictures of them on an old school looker. Are there any iconic cars that ran staggered 14" and 15" rears?

If they won't look right I'd like to get them in the hands of an early 912 or 911t owner and keep looking for a set of 15"s (these are so much more budget friendly though.)

[xavier]

Look at this topic
Xavier

http://cal-look.no/lounge/index.php/topic,16962.msg246003.html#msg246003

[Jos]

Thanks Xavier! I did a searc but didn't come up with that. I guess I wasn't using the right terms

[xavier]

Another car on 14 fuchs

http://cal-look.no/lounge/index.php/topic,20665.0.html

[xavier]

Frenchy's Ghia was also on 14" Fuchs

[56BLITZ]

Are there any iconic cars that ran staggered 14" and 15" rears?

My '70 is not iconic, but I have been driving it everyday with 14" & 15" alloys . . . front tires are 175/65 R 14 . . . . rear tires are 165/80 R 15 . . . . turns and stops fine.
I will replace the rear tires with a larger size at some point.
I have my adjusters quite low . . . the only thing that drags on occasion is the stock anti-roll bar.
It still has drum brakes all the way around.
LMK if ya want to see a photo.

[Jos]

Of course I'd love to see photos! It's never too late to become iconic

[56BLITZ]

[ Attachment: You are not allowed to view attachments ] [ Attachment: You are not allowed to view attachments ]

[Jos]

Real cool! A '70? Looks very similar to what my '68 will sit like with them on there. (only my '68 is red)

[56BLITZ]

Real cool! A '70? Looks very similar to what my '68 will sit like with them on there. (only my '68 is red)

Thanks! I really enjoy driving it!
I need to get some spacers (10mm?) for the back along with grinding the end of the axles in order to fit center caps.
I think it would look better with larger tires in the rear . . . . maybe 195/70 R 15

Post pics of yours when you are able, ok?

[Zach Gomulka]

Only thing that sucks about 14's on the front is you can't use drop spindles

[Jos]

I noticed that in the other post. Is it possible to shave down the spindle some or where is the interference?

[Rick Meredith]

Sits nice Mrk

[Zach Gomulka]

I noticed that in the other post. Is it possible to shave down the spindle some or where is the interference?

On the bottom ball joint. Some 15" wheels require a little shave to the ball joint, I don't think there's any easy way you'd get a 14" to fit.

[team97]

Jim Moore's Notch was on 14's, then I put 15's on it.

[Larry S]

Here is my old oval circa 1983 with 14" alloys on it.

[DWL_Puavo]

Jos - or any other else having 14" original fuchs - could you please weigh them as I can't find their weight from any of the usual lists.

EDIT: Thanks a lot Jos, and for us non-imperialistics - 11lbs is just 5kg.

Puavo

[Jos]

I just weighed one and it was 11lbs. exactly.

[youngnstudly]

I have a set of 14" Fuchs for my bug that hopefully I can install sometime next year. They are still in decent shape with the anodizing not worn through, so maybe I can just repaint the black areas of the rims in satin black...and find 2 more center caps. The 14's are supposed to fit a link pin front beam with dropped spindles, according to a few on the samba. Fingers crossed.

@Larry S, do you recall what size tires you were running on your 14's? I realize it was over 31 years ago, so no worries if you don't remember. 

Thanks,
Andy

[Dave Rosique]

I have a set of 14" Fuchs for my bug that hopefully I can install sometime next year. They are still in decent shape with the anodizing not worn through, so maybe I can just repaint the black areas of the rims in satin black...and find 2 more center caps. The 14's are supposed to fit a link pin front beam with dropped spindles, according to a few on the samba. Fingers crossed.

@Larry S, do you recall what size tires you were running on your 14's? I realize it was over 31 years ago, so no worries if you don't remember. 

Thanks,
Andy

Yes, 14" will fit a link pin with dropped spindles.
My Oval project.. 14" with F-560 front, 15" with M&H rear.
  [ Attachment: You are not allowed to view attachments ]

[Dave Rosique]

forgot to add, mine are 155R14 from Coker Tire.
 

[56BLITZ]

It seems to me that the selection of 14" tire sizes has improved since the eighties.

Dave, yer car is lookin' GOOD!
Larry, your car looked great also!

[Zach Gomulka]

That looks good. I've got a set of 14's & 15's, was planning on running a 175/70 up front. It will fit the wheel perfectly, and be only a tad shorter than a 145/15.

[youngnstudly]

Yes, 14" will fit a link pin with dropped spindles.
My Oval project.. 14" with F-560 front, 15" with M&H rear.
   [ Attachment: You are not allowed to view attachments ]

forgot to add, mine are 155R14 from Coker Tire.
  

That looks great! Thanks for the info Dave!  

I can't believe the pricing on some of the 14" tires. I was looking last night online and you can get some decent (name brand) rubber for as little as $45 per tire, depending on where you look. Of course you can probably get a $145 tire if you wanted to as well. I was surprised at the selection of tires that cost $50-65, when I'm used to paying $80-100 per tire for 15's.

[Dave Rosique]

I'm happy with the look of 14's & 15's (see below)
For the record, 155R14 is only slightly taller than a 135R15
     [ Attachment: You are not allowed to view attachments ]

[Jos]

I love the contributions so far guys! Makes me grateful to not have to spend 4k to have a nice set or rims I agree with you Dave, that combo works really well on VWs

[Larry S]

Dave, I don't remember the size of the tires, I think 145's up front, I do remember they were michelins, seemed to last forever and I used them like a $2 whore.....

[56BLITZ]

I'm happy with the look of 14's & 15's

Hey Dave, those are the M&H P215/65-15, correct?

[Dave Rosique]

I'm happy with the look of 14's & 15's

Hey Dave, those are the M&H P215/65-15, correct?

Correct!