DPR 82mm crank and flywheel. Kennedy stage 2 plate. CB 5.4 race rods

[baz]

Have an almost new DPR crank and lightened flywheel with 11/32 dowel pins, crank only used for 2 hours on dyno, was standard mains and journals but needs grinding on journals at least. £250 as is or £375 after re-grind

Kennedy stage 2 pressure plate,  again 2 hours old. £60

cb race rods 5.4, again 2 hours old, I'm switching to 5.5s. £175

Will do a deal on the whole package for £450 as is or £575 after re-grind

Parts are in uk west london area

[Jay Aldred]

Why does it need a re grind ?

[baz]

The engine locked up during that dyno session, oil starvation to the rods caused no 2 to lock up. Theres a thread in pure racing about it.

Cheers

Edit. It was a soft lock up,  went at idle and there is absolutely no heat discolouration to the rods or crank.

I've bought new replacement crank as the wait for a re grind was taking the piss.

[baz]

Crank flywheel and clutch still here. Also got nos vw main and rod bearings available to suit first undersize.