The Cal-look Lounge
Welcome, Guest. Please login or register.
Did you miss your activation email?
November 24, 2024, 20:01:26 pm

Login with username, password and session length
Thank you for your support!
Search:     Advanced search
351216 Posts in 28657 Topics by 6854 Members
Latest Member: 74meanmachine
* Home This Year's European Top 20 lists All Time European Top 20 lists Search Login Register
+  The Cal-look Lounge
|-+  Cal-look/High Performance
| |-+  Cal-look
| | |-+  Electromotive Tuner needed
« previous next »
Pages: [1] Print
Author Topic: Electromotive Tuner needed  (Read 8013 times)
bluebonnet
Newbie
*
Posts: 2


« on: May 09, 2016, 19:32:25 pm »

Hi I am looking for someone in the Toronto area that is able to tune an electromotive fuel injection installed on a vw type 1 motor. Any ideas?
Logged
Martin S.
Hero Member
*****
Posts: 990



« Reply #1 on: May 09, 2016, 22:52:57 pm »

I'm in the same boat since Steve S. passed away last year. What is your car and engine? Did you install it yourself? I have a Tec3r on my engine but I would like to increase the boost and re-tune it someday. When the motor was new, about 5 years ago, we drove out to the Berlin Klassic where they have a dyno set up for $60 they will run it for you. The guys who ran the dyno said they could tune my engine and turn the boost up but I don't remember their name. We have been googling for a tuner and came up with these guys who are in the city... http://www.dynamotorsports.ca/news.htm
Please do let me know if you come up with anything or use these guys and have any feedback, thanks!
Logged

Cal Look white 68 Bug with AJ Sims EFI Turbo 2332. 194hp 240tq @ 5500 rpm 3psi boost.
Fiatdude
Hero Member
*****
Posts: 1823



« Reply #2 on: May 10, 2016, 00:57:09 am »

There is a guy in Torrance, CA that was able to do some pretty good tuning over the internet -- was really cool to watch -- and then he did the final tuning on the Ghia on the rollers --

 https://www.youtube.com/watch?v=m52kBy7a6fc

His Name is Richard Clewett (310) 406-8788 -- -- good guy!!!!
Logged

Fiat -- GONE
Ovalholio -- GONE
Ghia -- -- It's going

Get lost for an evening or two -- http://selvedgeyard.com/

Remember, as you travel the highway of life,
For every mile of road, there is 2 miles of ditch
Martin S.
Hero Member
*****
Posts: 990



« Reply #3 on: May 10, 2016, 02:05:48 am »

I wouldn't hesitate to do that trip in my car. I'd want another Setrab cooler tho Roll Eyes
Logged

Cal Look white 68 Bug with AJ Sims EFI Turbo 2332. 194hp 240tq @ 5500 rpm 3psi boost.
Fiatdude
Hero Member
*****
Posts: 1823



« Reply #4 on: May 10, 2016, 02:10:12 am »



able to do some pretty good tuning over the internet



Logged

Fiat -- GONE
Ovalholio -- GONE
Ghia -- -- It's going

Get lost for an evening or two -- http://selvedgeyard.com/

Remember, as you travel the highway of life,
For every mile of road, there is 2 miles of ditch
Martin S.
Hero Member
*****
Posts: 990



« Reply #5 on: May 10, 2016, 15:35:05 pm »

The trip sounded more fun though.  Cheesy
Logged

Cal Look white 68 Bug with AJ Sims EFI Turbo 2332. 194hp 240tq @ 5500 rpm 3psi boost.
BeetleBug
Hero Member
*****
Posts: 2836


Snabba grabben...


« Reply #6 on: May 10, 2016, 18:19:31 pm »

Guys,

A ECU does a very simple job no matter what brand it is. Why dont you spend some time to figure it out yourself? It is fun and interesting and unless you are a complete idiot it is very difficult to do any real mistakes.

As long as you have set the fuel and the ignition the rest is compensation basically. Compensate for boost, compensate for temperature, compensate for oil pressure... you name it. Cold start, auto-tune and other nice-to-haves you can take later.

Give it a try!

-BB-
Logged

10.41 - 100ci - 1641ccm - 400hp
Fiatdude
Hero Member
*****
Posts: 1823



« Reply #7 on: May 10, 2016, 19:37:29 pm »

BB -- You've never tried to setup an AEM, I was getting real good at my Electromotive and a couple of others and the AEM really stumped me -- -- Scott Featherolf is great tuning AEM as he has it on the Baron, and he even told me to find a processional to set it up .. .. LOL -- -- and it has been at "the professional's" shop for a while now too as he sorts out all my weird ideas and tries to get them to work with the EMS-4
Logged

Fiat -- GONE
Ovalholio -- GONE
Ghia -- -- It's going

Get lost for an evening or two -- http://selvedgeyard.com/

Remember, as you travel the highway of life,
For every mile of road, there is 2 miles of ditch
Martin S.
Hero Member
*****
Posts: 990



« Reply #8 on: May 10, 2016, 19:54:01 pm »

When I was out driving and had Steve S. riding shotgun tuning my Tec3r, he said 'do you realize some people spends several hundred hours tuning the ECU?' wow. We were out for a couple hours and did some good work on the tune.
Logged

Cal Look white 68 Bug with AJ Sims EFI Turbo 2332. 194hp 240tq @ 5500 rpm 3psi boost.
bluebonnet
Newbie
*
Posts: 2


« Reply #9 on: May 11, 2016, 02:44:42 am »

BB it would be nice to figure out and learn. It looks like I have no choice to try but you can't beat someone that knows what they are doing. I know guys that build race cars and they pay to get their ecu tuned. I'm sure if it was that easy, they would do it themselves.  I have no clue about tuning ECUs so learning from someone would be helpful. Hopefully some light reading and if I can find a youtube video I might get lucky.

Martin if I come up with someone/shop will let you know.  I am running a  2L na type 1 in a 69 sedan with a 901 tranny. The eco is a Tec gt. I wired up myself. Just doing finishing touches and hopefully I can start up soon.
Logged
Chip
Full Member
***
Posts: 143


« Reply #10 on: May 11, 2016, 03:10:00 am »

Street driven cars are much easier to tune than race cars, sort of...
You get way more opportunity to tune, though you have way more to actually tune.

Light reading isn't what you are looking for. Find the meat and potatoes, that's where the good info is.
 
I have definitely noticed a large gap in support systems for you poor Electromotive users. Doesn't seem like many tuners still want to touch that stuff. AEM, motec, haltec, and other big names seem to be taking over.
Logged
BeetleBug
Hero Member
*****
Posts: 2836


Snabba grabben...


« Reply #11 on: May 11, 2016, 06:16:33 am »

Bluebonnet;

Feel free to post your ignition and fuel map here on The Lounge so that we all can have a look. Is the engine ready to fire? You have found the crank trigger and set the timing accordingly? I had a look at the TECGT manual and it sure has all you need and then some.

-BB-
Logged

10.41 - 100ci - 1641ccm - 400hp
Martin S.
Hero Member
*****
Posts: 990



« Reply #12 on: May 11, 2016, 15:12:33 pm »

There are different ways to tune as well. On the dyno or on the street. Some tuners start on the top end and then tune the mid and low ends. Others start at idle and extrapolate for the higher end. Then test and tune. You can also tune at the track using quarter mile times. Steve tuned the Red Victor car to a world record time in 11 runs from scratch at the track!
Logged

Cal Look white 68 Bug with AJ Sims EFI Turbo 2332. 194hp 240tq @ 5500 rpm 3psi boost.
Martin S.
Hero Member
*****
Posts: 990



« Reply #13 on: May 11, 2016, 15:16:25 pm »

Bluebonnet, do you have an air/fuel wide band gauge yet?
Logged

Cal Look white 68 Bug with AJ Sims EFI Turbo 2332. 194hp 240tq @ 5500 rpm 3psi boost.
richie
Hero Member
*****
Posts: 5687



« Reply #14 on: May 11, 2016, 18:33:52 pm »


 Steve tuned the Red Victor car to a world record time in 11 runs from scratch at the track!

Martin are you referring to Andy frosts car? I thought Shane T tunes it?

cheers Richie
Logged

Cars are supposed to be driven, not just talked about!!!   


Good parts might be expensive but good advice is priceless Wink
Martin S.
Hero Member
*****
Posts: 990



« Reply #15 on: May 11, 2016, 18:55:49 pm »

Yes that's the car, but it was in the mid-2000's that Steve went to England to tune it. He said he had a great time there. Cheesy
I wish I knew where the video was of Andy's engine on the engine dyno at the Cosworth facility. The exhaust glowing red hot! And the hp went over the dyno's capability.
« Last Edit: May 11, 2016, 19:05:32 pm by Martin S. » Logged

Cal Look white 68 Bug with AJ Sims EFI Turbo 2332. 194hp 240tq @ 5500 rpm 3psi boost.
richie
Hero Member
*****
Posts: 5687



« Reply #16 on: May 12, 2016, 07:52:04 am »

Yes that's the car, but it was in the mid-2000's that Steve went to England to tune it. He said he had a great time there. Cheesy
I wish I knew where the video was of Andy's engine on the engine dyno at the Cosworth facility. The exhaust glowing red hot! And the hp went over the dyno's capability.

Ah ok, that was earlier version of the car

cheers Richie
Logged

Cars are supposed to be driven, not just talked about!!!   


Good parts might be expensive but good advice is priceless Wink
Martin S.
Hero Member
*****
Posts: 990



« Reply #17 on: May 12, 2016, 15:06:55 pm »

Yes it was number 1, his family car that was the fastest street legal car at the time. This one: https://youtu.be/PBwK9Lbfx5Q
Logged

Cal Look white 68 Bug with AJ Sims EFI Turbo 2332. 194hp 240tq @ 5500 rpm 3psi boost.
dragvw2180
Sr. Member
****
Posts: 304



« Reply #18 on: May 12, 2016, 17:37:37 pm »

 A few years ago I called Electromotive tech for assistance, they were really helpful and were willing to give me a reflash and a close setup for the PCM . I ended up not using the EFI and it is still sitting on the shelf. The software looked pretty user friendly , maybe we will try it this winter.
Logged
Torben Alstrup
Hero Member
*****
Posts: 716


« Reply #19 on: May 14, 2016, 19:14:13 pm »

I have met quite a few people that had problems with the Tec series. when we get the cars "on hand" it is 95% of the time because people do not pay attention to the simplest wiring ruling. I even met one guy that tore off his Tec3 and swopped it with a VEMS and claimed better hp and driveability on his 475 hp BMW. - Well,,,, lets just say that driving behind him made my eye´s sting. Even the TecS can handle much more than most VW aficionado´s need. Its a good system with LOTS of opportunities.

T
Logged
Fiatdude
Hero Member
*****
Posts: 1823



« Reply #20 on: May 14, 2016, 20:20:38 pm »

I've got a new 'remanufactured' Tec GT setting in a box on shelf if anyone is interested.......... $850 US shipped
Logged

Fiat -- GONE
Ovalholio -- GONE
Ghia -- -- It's going

Get lost for an evening or two -- http://selvedgeyard.com/

Remember, as you travel the highway of life,
For every mile of road, there is 2 miles of ditch
Torben Alstrup
Hero Member
*****
Posts: 716


« Reply #21 on: May 15, 2016, 08:34:37 am »

What do you mean by "remanufactured" ?
Logged
Pages: [1] Print 
« previous next »
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!