The Cal-look Lounge
Welcome, Guest. Please login or register.
Did you miss your activation email?
November 26, 2024, 21:57:13 pm

Login with username, password and session length
Thank you for your support!
Search:     Advanced search
351224 Posts in 28657 Topics by 6854 Members
Latest Member: 74meanmachine
* Home This Year's European Top 20 lists All Time European Top 20 lists Search Login Register
+  The Cal-look Lounge
|-+  Cal-look/High Performance
| |-+  Technical stuff
| | |-+  Narrowed irs trailing arms. Who does them? 		« previous next »
Pages: 1 [2] Print
Author Topic: Narrowed irs trailing arms. Who does them?  (Read 18773 times)
richie
Hero Member
*****
Posts: 5687
« Reply #30 on: October 12, 2018, 18:48:56 pm »
Here's some I am just finishing up that are 20mm narrowed and I tweaked the camber on them so that they are at zero still when stationary even though car is lowered a little Wink
Logged
Cars are supposed to be driven, not just talked about!!!   


Good parts might be expensive but good advice is priceless Wink
richie
Hero Member
*****
Posts: 5687
« Reply #31 on: October 12, 2018, 19:03:22 pm »
More pics as it will only let me add 2 to each post Roll Eyes
Logged
Cars are supposed to be driven, not just talked about!!!   


Good parts might be expensive but good advice is priceless Wink
richie
Hero Member
*****
Posts: 5687
« Reply #32 on: October 12, 2018, 19:04:25 pm »
 Smiley
Logged
Cars are supposed to be driven, not just talked about!!!   


Good parts might be expensive but good advice is priceless Wink
jmarkha1
Jr. Member
**
Posts: 84



WWW
« Reply #33 on: October 12, 2018, 20:54:49 pm »
NICE WORK - Realistically how narrow could you go using that technique and retain stock type 3 drums? - 25-30MM?
Logged
richie
Hero Member
*****
Posts: 5687
« Reply #34 on: October 13, 2018, 00:49:46 am »
Quote from: jmarkha1 on October 12, 2018, 20:54:49 pm
NICE WORK - Realistically how narrow could you go using that technique and retain stock type 3 drums? - 25-30MM?

With custom axles yes looks like 30mm might be possible but until they are cut up its hard to say for sure
Logged
Cars are supposed to be driven, not just talked about!!!   


Good parts might be expensive but good advice is priceless Wink
Bruce
Hero Member
*****
Posts: 1420
« Reply #35 on: October 14, 2018, 03:12:22 am »
That's how I did mine many years ago.  Mine are narrowed 34mm each side.

Beware, your inner ball bearing will not fit.  That's because of the weld on the OD of the bearing housing being right at the bearing. Ideally, you would put the TA on your mill and bore it back to the stock diameter.

Have you checked the clearance between your tire and the tab that bolts to the spring plate?
Logged
richie
Hero Member
*****
Posts: 5687
« Reply #36 on: October 14, 2018, 17:21:34 pm »
Quote from: Bruce on October 14, 2018, 03:12:22 am
That's how I did mine many years ago.  Mine are narrowed 34mm each side.

Beware, your inner ball bearing will not fit.  That's because of the weld on the OD of the bearing housing being right at the bearing. Ideally, you would put the TA on your mill and bore it back to the stock diameter.

Have you checked the clearance between your tire and the tab that bolts to the spring plate?

Bearings fit and yes checked clearance, got plenty Smiley
Logged
Cars are supposed to be driven, not just talked about!!!   


Good parts might be expensive but good advice is priceless Wink
Pages: 1 [2] Print 
« previous next »
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!