The Cal-look Lounge
Welcome, Guest. Please login or register.
Did you miss your activation email?
July 19, 2018, 04:49:32 AM

Login with username, password and session length
Thank you for your support!
Search:     Advanced search
337242 Posts in 26570 Topics by 6166 Members
Latest Member: bevbry4nt
* Home This Year's European Top 20 lists All Time European Top 20 lists Search Login Register
+  The Cal-look Lounge
|-+  Cal-look/High Performance
| |-+  Pure racing
| | |-+  Comp eliminators, can they be bored for 96.5?
« previous next »
Pages: [1] Print
Author Topic: Comp eliminators, can they be bored for 96.5?  (Read 1405 times)
leec
Hero Member
*****
Posts: 2102


« on: December 02, 2017, 09:49:51 AM »

As in title, is it possible?
Lee
Logged

O/FF 26
wph
Jr. Member
**
Posts: 75



« Reply #1 on: December 02, 2017, 23:35:22 PM »

I think they are, I have a set of OLD Superflow heads and they are going to be 98,00mm but I had them welded for WBX bolt pattern.Barrel OD is 106.5 before breaking through casting.
We are also running a set of custom bored/honed Jaycee barrels on older Angle Flow castings / type 1 pattern with 96.9 bore...

Pekka
Logged
Udo
Hero Member
*****
Posts: 2038



« Reply #2 on: December 03, 2017, 16:31:11 PM »

Yes you can do that , if you have relocated bolt plattern you can go up to 101,6.

Udo
Logged

leec
Hero Member
*****
Posts: 2102


« Reply #3 on: December 03, 2017, 17:30:18 PM »

Thank you Udo, the heads are already built up. If I remove valves etc and have them bored will I be ok? I won't have to relocate valve seats etc?

Lee
Logged

O/FF 26
Jonny Grigg
Full Member
***
Posts: 232



« Reply #4 on: January 10, 2018, 22:10:50 PM »

Out of interest Lee, what pistons any cylinders do you have for 96.5?

Cheers

Jonny
Logged

No Compromise. O/FF111
leec
Hero Member
*****
Posts: 2102


« Reply #5 on: January 10, 2018, 22:14:54 PM »

Hi Jonny,

I got offered a case that was a 96.5 bore, it was a thinking out loud question!!

Lee
Logged

O/FF 26
Udo
Hero Member
*****
Posts: 2038



« Reply #6 on: January 11, 2018, 19:05:53 PM »

For 96,5 you do not have to remove anything . A case with 10mm threads for example can get bored to that cylinder - super street rules :-)

Udo
Logged

leec
Hero Member
*****
Posts: 2102


« Reply #7 on: January 11, 2018, 21:18:44 PM »

So a 10mm head stud case can accommodate 96.5?
Lee
Logged

O/FF 26
Udo
Hero Member
*****
Posts: 2038



« Reply #8 on: January 13, 2018, 18:16:54 PM »

If the 10mm thread is right in the case without savers it works

Udo
Logged

bedjo78
Full Member
***
Posts: 182


« Reply #9 on: January 14, 2018, 11:04:52 AM »

Hi Jonny,

I got offered a case that was a 96.5 bore, it was a thinking out loud question!!

Lee

Interested though ... is it mag case ? 
Logged
volkskris
Sr. Member
****
Posts: 399



« Reply #10 on: January 23, 2018, 11:52:16 AM »

If the 10mm thread is right in the case without savers it works

Udo
So what is actually done to get that bore to fit Udo?
Logged
Udo
Hero Member
*****
Posts: 2038



« Reply #11 on: January 29, 2018, 19:25:47 PM »

Only 10mm threads in the case , like aluminiums . No bigger inserts

Udo
Logged

Pages: [1] Print 
« previous next »
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!