Berg grooved venturis

[Karlos99]

Hi all

After some opinions/feedback. What’s people’s thoughts on the Berg grooved vents? Toying with getting some for my IDA’s but they’re fairly pricey so want some feed back before I splash out. They would be going in my 2110 which has an FK10, 42x37.5 044’s And IDA’s with 38mm vents

Cheers

Karl

[Sam K]

I installed a set of the 37/42mm grooved venturis on my '67 and I'm pretty pleased with the results so far. I had to go way up on the air correctors and I'm still dialing it in but it's getting close. The engine seems to have a much wider powerband now.

[Karlos99]

I installed a set of the 37/42mm grooved venturis on my '67 and I'm pretty pleased with the results so far. I had to go way up on the air correctors and I'm still dialing it in but it's getting close. The engine seems to have a much wider powerband now.

What size/spec is your engine?

[67paulo]

Best money spent. Lot wider power band for sure.

[Sam K]

I installed a set of the 37/42mm grooved venturis on my '67 and I'm pretty pleased with the results so far. I had to go way up on the air correctors and I'm still dialing it in but it's getting close. The engine seems to have a much wider powerband now.

What size/spec is your engine?

It's a 2332 with 44x37 Jeff Denham heads, 9.5 to 1 compression, the cam is Web cam with .498 lift and 312 duration, 48 IDA's, 1.75" merged exhaust.

[Karlos99]

I installed a set of the 37/42mm grooved venturis on my '67 and I'm pretty pleased with the results so far. I had to go way up on the air correctors and I'm still dialing it in but it's getting close. The engine seems to have a much wider powerband now.

What size/spec is your engine?

It's a 2332 with 44x37 Jeff Denham heads, 9.5 to 1 compression, the cam is Web cam with .498 lift and 312 duration, 48 IDA's, 1.75" merged exhaust.

What size would you recommend for my set up?

[chez2165]

If you contact Bergs and send them your specs they will be able to assist. Thats what I did when I bought mine.