Engine Pics?

[Larry S]

My 1776 I built last year, went with old set of Kadrons and had the air cleaners chromed. used a old Porsche oil filter system for the breather, spaced the top up a tad so it would vent. I think it came out nice.
Larry

[Larry S]

Old pic of the engine in my brothers old car Radical Rod way back when.

[Frenchy Dehoux]

   Here a few pictures of the engine I had in my 54 oval.

   Thanks
   Frenchy

[bilboa2]

 I like the exh. in ceramic black better than previous silver ceramic coating. still need to sheath dist lead wires.. bill

[TexasTom]

Looking good, Bill!
Coil pack in the luggage compartment (behind rear seat) or over trans?
Lack of ignition wires is really clean.
Take care out there ...
TxT

P.S. When're we gonna see the timeslips? No pressure, 

[Addie/DVK]

My recently finished enginebay from my '72 late model

[Nico86]

My recently finished enginebay from my '72 late model

I don't know why, but I like that car!

 

[Donny B.]

My 2165 engine in my '66 Bug.  Car has over 460k miles, but the engine is fresh.

[TexasTom]

Super clean Donny ... still rinning your Berg DCNFs, right? 

[Donny B.]

still rinning your Berg DCNFs, right?

Yep, that's the only dual carb setup I have ever run.  They work really well.  Not being a racer I don't need all that extra HP.  Besides I pretty much got racing out of my system back in the '70s when I raced motocross...

[TexasTom]

Yes, MotoCross in the '70's, That would get it out of ANYONE'S system! LOL
Good one Donny!
 

I sold mine for 48s back when, but have another pair now (and some 44s!), watch out!
Take care,
TxT

[Fiatdude]

Here is some overkill for the street -- 10 pounds of poop in a 5 pound bag -- my 2919 with a couple of accessories

[TexasTom]

Does it RUN yet?

[Fiatdude]

Yep 300+ HP at 4500 rpm - 12 lbs boost -- The car was pulling the dyno roller so fast in fourth, the tuner thought he had the car in third    -- then lost an exhaust gasket and lost boost -- still tuning -- just switched over to E85, changed out the 60 LB injector for 160 lb, so starting all over again -- -- gonna pull the engine this weekend and get rid of the stock engine mounts so it won't be moving so much by next week LOL

<a href="http://www.youtube.com/v/JJNaZRlCDPE" target="_blank">http://www.youtube.com/v/JJNaZRlCDPE</a>

[kingsburgphil]

Here is some overkill for the street -- 10 pounds of poop in a 5 pound bag -- my 2919 with a couple of accessories

Outstanding Fiatdude!  That looks like a classic example of "The only easy day was yesterday".




PS. What kind of brakes are you using? 

[jamiep_jamiep]

My recently finished enginebay from my '72 late model

Thats a thing of beauty! Nice work. 

[banditina]

this is my 1776cc

http://stinkingass.blogspot.com/2009_08_01_archive.html

[bilboa2]

tom, dual coil pack located on hat shelf, box is fiberglass formed so less interference signal chance. plugwires go throught firewall then up from underneath, four indvidual holes with grommets. no et yet, looking at clutch management system/ideas. I agree with nico, late blue 72 addie car is sweet. nice contrast of black / blue..bill

[Fiatdude]

Here is some overkill for the street -- 10 pounds of poop in a 5 pound bag -- my 2919 with a couple of accessories

Outstanding Fiatdude!  That looks like a classic example of "The only easy day was yesterday".




PS. What kind of brakes are you using? 

I have disc's all around

[DKK Ted]

Here's my 2303cc.....

[TexasTom]

Love the details that mask and simplify the compartment ... dark Berg linkage frame & plug wire tube ... nice touches.
How does she run?
TxT

[DKK Ted]

Thanks Tom, runs pretty good, has more mid and top end. It's only tempory for now, just finished my rebuild on my first 2303cc with JD heads, 42X37.5. Has a E125 on a 106 LC, also with 1.25 rockers. Will be going in soon. My 2303cc in the car now, (pictured) will be be freshened up with my new heads from Fred Simpson, 46X36. Will tweak the cam a little, 86C , This motor will be back in by next year. Want to have fun with the new motor, all low end. Will post a pic when completed.

Ted

[65bug]

Hey guys,
    Here's mine! Almost done! A few more tidying up with the wires!  2165 with all the FIXINS!!!

1. Pauter welded stroker crank 
2. Pauter cam 268 intake/exhaust 550 lit at valve 
3. straight cut gears 
4. Tims stage 2 special heads. Larger ports w/ 5 angle valve job. Blend ported manifolds
5. 48 Dellortos
6. 9.7-1 compression on pump gas 
7. Berg balanced, Berg case machining(new case) Berg pushrods, tubes, oil pump, spot faced, full flowed, etc. 
8. 1.4 Cb rockers
9. 1 5/8 merged header 
10. Mallory Unilite Dist. 
         Fine tuning now!

[Eddie DVK]

Finaly got my engine ready an running, got it trough the APK(Dutch MOT), some fine tuning to do.
Maybe ready to go for the trip to EBI.



Regards Edgar

[Jesse/DVK]

Wanna join the DVK convoy on Friday Edgar?

[Eddie DVK]

Hi Jesse,
I dont no if I am going with the beetle, got a small oil leak I have to find on the front of the engine maybe flywheel seal.
I am going but do not no witn which car.
But if I join you, I will you let you guys know.

Kind Regards Edgar

[Catbox]

Here is the stock 1600 in my '73 1303 after installing the Kadrons, MSD, and some rebuild in a can...



 

Soon to be a 2332...

[fredy66]

My 1776 I built last year, went with old set of Kadrons and had the air cleaners chromed. used a old Porsche oil filter system for the breather, spaced the top up a tad so it would vent. I think it came out nice.
Larry

cool air filters do thay have them for weber ?

[bug]

My typ4 - 2.6 engine.

<a href="http://www.youtube.com/v/E5YqFX8N6ds" target="_blank">http://www.youtube.com/v/E5YqFX8N6ds</a>

[draven898]

Here's my 2303cc.....

where did you get the black line from ? do it yourself ?