split rim empi 8. The seals, bolts, and caps thread post it here

[Rocket Ron]

I have now got the seals I need with the help of "Speedwell" aka Fabs, thank for the help

Would it be helpful to post links for parts for split rim empi's and such here in this thread

If this needs to be moved to another section please do.

 

[Neil Davies]

Ron, I think Fabian had found some info out about these. I need them for my five whees too!

[andy M.]

i had a set on my notchback and they didn't have seals, i just used an inner tube instead, worked great

andy

[Neil Davies]

i had a set on my notchback and they didn't have seals, i just used an inner tube instead, worked great

andy

Andy, I think I have your old wheels. Did you sell the car to Matt Keene, and were the wheels polished?

[benssp]

try spennyp on here, he sourced some for Empi 5's, might be the same size

[andy M.]

my old wheels have really done the rounds, they were on my Notch (clive prews old one) which i sold to paul medhurst, he sold it to beaker who put a set of 5 bolt sprints on it, he sold the empi's to chris lambourne who bought my other notch of me (68 auto) and he sold the car to matt who sold the wheels to you, simple.

andy

[Neil Davies]

my old wheels have really done the rounds, they were on my Notch (clive prews old one) which i sold to paul medhurst, he sold it to beaker who put a set of 5 bolt sprints on it, he sold the empi's to chris lambourne who bought my other notch of me (68 auto) and he sold the car to matt who sold the wheels to you, simple.

andy

Well, nearly - I bought the wheels of a chap called Ian who goes by the name of Topbloke on VZi - I think he bought them off Matt - and I think the car went to Marco Mansi and is now his black WBX-motored car.

Anyway, back on topic - I've not taken the tyres off yet but I know a couple of the nuts are missing off the backs of the wheels so I thought it would be a good idea to split the wheels down and clean them up, and fit new seals while they were apart.

[Zach Gomulka]

Slinger and I each need a set, as well.....

[Lids]

I have some

[speedwell]

oups ron i forgot you sorry 

6 you said
 i will find the invoice for 4 
 let me know

rgd
 fabs

[Rocket Ron]

oups ron i forgot you sorry 

6 you said
 i will find the invoice for 4 
 let me know

rgd
 fabs

no problems. I have six wheels in the garage at this time, I'll keep the best five and sell the 6th

Let me know how much I'll need to send if you can get them for me

[speedwell]

oups ron i forgot you sorry 

6 you said
 i will find the invoice for 4 
 let me know

rgd
 fabs

no problems. I have six wheels in the garage at this time, I'll keep the best five and sell the 6th

Let me know how much I'll need to send if you can get them for me

ok 

[Rocket Ron]

Thanks

[Lids]

the seals for 5's and 8's are different lengths.

[speedwell]

16.31 € for 4 seal

[Rocket Ron]

16.31 € for 4 seal

are they only in set of 4 if so I'll have two if they only have one set I'll have that 

pm me your address and I'll send you some cash or paypal you, plus some for the fuel for that sprint carb kit 

Thanks Ron

[speedwell]

16.31 € for 4 seal

are they only in set of 4 if so I'll have two if they only have one set I'll have that 

pm me your address and I'll send you some cash or paypal you, plus some for the fuel for that sprint carb kit 

Thanks Ron

you can buy those one as 1 piece if you need 6 no probs
first i will go to the shop ,to see if there's 6 seals in stock , after i will send you the total price +shipping , nothing for the fuel ron 
let me know
fabs

[Rocket Ron]

16.31 € for 4 seal

are they only in set of 4 if so I'll have two if they only have one set I'll have that 

pm me your address and I'll send you some cash or paypal you, plus some for the fuel for that sprint carb kit 

Thanks Ron

you can buy those one as 1 piece if you need 6 no probs
first i will go to the shop ,to see if there's 6 seals in stock , after i will send you the total price +shipping , nothing for the fuel ron 
let me know
fabs

That ould be great

Thanks
I'll send you a little something for your car with the money

[Rocket Ron]

any news Fabs ?

Regards Ron 

[speedwell]

i will go tomorrow ron
 

[Rocket Ron]

i will go tomorrow ron
 

sorry not chasing you up just wondering

Thanks Ron

[speedwell]

i will go tomorrow ron
 

sorry not chasing you up just wondering

Thanks Ron

ron , go to the shop today they had only 5 spare
can i take those one Have to I ask if they  are again going to bring in it 

price for five is 20.39€ without shipping  , this one will be cost not more than 5€

rgd
fabs

[Rocket Ron]

i will go tomorrow ron
 

sorry not chasing you up just wondering

Thanks Ron

ron , go to the shop today they had only 5 spares
can i take those one Have to I ask if they  are again going to bring in it 

price for five is 20.39€ without shipping  , this one will be cost not more than 5€

rgd
fabs

I'll send you 30 euros plus a little suprise

pm me your details and I'll send it off

Thanks alot Ron


 

I have some

ps Lids have you still got any, now only looking for one more

[speedwell]

pm sent

[speedwell]

ron send me your adress today ,to post the package tomorrow
 thx
fabs

[SlingShot]

I have a line to get some of these seals, but I was hoping to get a "group buy" going, since I know a few of us need these. Please let me know if your interested.

[Rocket Ron]

ron send me your adress today ,to post the package tomorrow
 thx
fabs

Sent by email hope you got it

[Rocket Ron]

I have a line to get some of these seals, but I was hoping to get a "group buy" going, since I know a few of us need these. Please let me know if your interested.

i think I'm sorted for seals now, but I'm trying to get some wheel bolt inserts done by a friend,

He would be intrested to know the level of demand for inserts for 8 spokes and BRMs

if we could find out how many people want sets then we may be able to get the price down

Let me know

Ps now see the top of the page , 1st post

[nicolas]

keep me posted on the inserts. i have a lead on some as well, but it has been taking a year now and it is a father off a friend who can do it. so the price should be OK, but the timing is off, as always with favours i guess
but i plan on calling him and have the work done a bit faster. they were the 8 spoke type. the BRM type are a bit longer

[Neil Davies]

I've been looking into inserts too, but like Nicolas, they're a friend of a friend type deal. I need 12 or so I think.