The Cal-look Lounge
Welcome, Guest. Please login or register.
Did you miss your activation email?
December 27, 2024, 21:07:33 pm

Login with username, password and session length
Thank you for your support!
Search:     Advanced search
351310 Posts in 28675 Topics by 6859 Members
Latest Member: CarstenK
* Home This Year's European Top 20 lists All Time European Top 20 lists Search Login Register
+  The Cal-look Lounge
|-+  Cal-look/High Performance
| |-+  Cal-look
| | |-+  Used cam with new lifters experiences?		 « previous next »
Pages: [1] Print
Author Topic: Used cam with new lifters experiences?  (Read 2622 times)
Brandon Sinclair
Full Member
***
Posts: 194
« on: June 10, 2009, 04:43:12 am »
I have a used camshaft that I am thinking of installing and running.  Of course the corresponding lifters are nowhere to be found so I will be using new lifters with the used cam.  Is there anything special I should be doing besides the normal dialing in the cam and run time to break in the new lifters and cam?  I have never run a used cam and new lifters.  Thanks
Logged
SlingShot
Hero Member
*****
Posts: 600
« Reply #1 on: June 10, 2009, 05:43:41 am »
Since your cam is used it's already "broken in". I would still use plenty of your favorite break in lube on the lifters.
Logged
Will Race For Beer !!!
Jim Ratto
Hero Member
*****
Posts: 7121
« Reply #2 on: June 10, 2009, 20:31:30 pm »
Quote from: Brandon Sinclair on June 10, 2009, 04:43:12 am
I have a used camshaft that I am thinking of installing and running.  Of course the corresponding lifters are nowhere to be found so I will be using new lifters with the used cam.  Is there anything special I should be doing besides the normal dialing in the cam and run time to break in the new lifters and cam?  I have never run a used cam and new lifters.  Thanks

I wouldn't do that if you want the engine to live.
Logged
richie
Hero Member
*****
Posts: 5696
« Reply #3 on: June 10, 2009, 21:41:51 pm »
Never had a problem doing it,and I have done this several times,even with k800 springs,if the cam is good then it shouldnt make any difference to it using new lifters

cheers richie,uk
Logged
Cars are supposed to be driven, not just talked about!!!   


Good parts might be expensive but good advice is priceless Wink
Brandon Sinclair
Full Member
***
Posts: 194
« Reply #4 on: June 10, 2009, 23:00:10 pm »
Thanks for the info guys. 

I figured what the heck since it is a crap shoot with new parts anyways that I might as begin with a used camshaft this time.  I know what the downside is, but that can also happen with new parts as well.

I will keep you posted on how it works.
Logged
Dave Rosique
Hero Member
*****
Posts: 1310


nobodyouno
« Reply #5 on: June 11, 2009, 03:12:26 am »

Brandon,

I've run used cams with new lifters many times over the years... I've even used re-ground lifters and never had a problem -BUT!- I've always been picky about my lifters.
On re-grounds, I INSIST on genuine VW (w/small VW stamp) ground by a quality shop such as DPR. I've never really trusted the "black" lifters... In the old days I liked Scat lifters, but I've been out of the VW/Porsche biz for a decade.

Now, on my project Oval I have a new Web 86C and Scat lifters that I bought about two years ago... hope they work out okay.

~Dave
Logged
Pages: [1] Print 
« previous next »
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!