engine set up 94x84

[pimp incher too]

i want to build engine 94x84
i have heads angle flow,ported and i have pauter rockers 1.3/1

what flywheel and clutch? 200mm en KEP stage2?
cam? W130,140 or should i take FK87-89 and buy other rockers? 1.4/1? or is there something beter?
H-beams 5.4 or 5.5?
ida 48 or ida 51.5?
compresion ratio,12/1?

the engine will be used only on the dragstrip.

some other hints and tips?

thanks

[BeetleBug]

If only dragrace, why not raise the CR to 13-14;1? And change cam to a FK89 or a FK91, maybe even a FK98 with 1.4 rockers.

Just my 2 cents.

Best rgs
BB

i want to build engine 94x84
i have heads angle flow,ported and i have pauter rockers 1.3/1

what flywheel and clutch? 200mm en KEP stage2?
cam? W130,140 or should i take FK87-89 and buy other rockers? 1.4/1? or is there something beter?
H-beams 5.4 or 5.5?
ida 48 or ida 51.5?
compresion ratio,12/1?

the engine will be used only on the dragstrip.

some other hints and tips?

thanks

[pimp incher too]

can i run 98octane when i do 13/1 ratio?

i did some changes,it would be 86X97bore so it gona be 2542cc.

would bugpack 4064-10 with1.3 rockers,valves titanium 48-38 be good? that is what i have.

thanks

[Lids]

to be honest, i don't think you should, watching you drive fast through a crowd of people outside the gates of EBI truly worries me.

[pimp incher too]

it is not for my car..

[BeetleBug]

Probably not, but why would you?

My point is that you have to decide if you want to build a race engine or something in between. And when you say drag race only I pressume you want a race engine. Why would you build a engine for race only and not want to take it to the limit? Try to get as much out of it as absolutely possible.

98 octane have no use in a race engine except for cleaning parts.

Best rgs
BB

can i run 98octane when i do 13/1 ratio?

i did some changes,it would be 86X97bore so it gona be 2542cc.

would bugpack 4064-10 with1.3 rockers,valves titanium 48-38 be good? that is what i have.

thanks

[Udo]

i want to build engine 94x84

That is a good combo . I do the same now , the smaller crank is better for use in an original case . And i never take a billet steel crank again . The forged Bugpack looks much stronger .

Udo

[Peter]

come on Lids,
with all of those sparks under the car from scraping...
that was soo cool 

[Lids]

Steve get taken to hospital on the Friday as someone was doing dounts outside the main gate and crashed into his car, later i saw those 3 cars driving really close together,sparks at about 40-50mph, the crowd was only a few metres from it all, if one of them had to brake even more damage!.  On Saturday night the police turned up to stop even more stupidty only to have stuff thrown at them.  Sunday morning one of the EBI crew was rushed to hospital with broken legs as unfortunately someone's brakes failed and ran him over.

So no I didn't think it was cool, it was on the street and dangerous.

[Peter]

Lids,
I was being sarcastic

[pimp incher too]

a lot friends from us keep the road cleared so we can passed safe and nothing happend. about the cabriolet,the guy whas drunken and had no insurance,i hope this is a lesson for everybody!

so,keep on topic pleasse.

i did some check ups and the combo 97X86 will not fit.

its gona be 94X84,i will keep posted and put some pics here,you can see the engine run@SCC.
i still don't know which cam/compr ratio i best use,i can change the inlet rockers to 1.4 but the outlet keeps 1.3. the heads stay the same A/F 48-38 titanium valves

thanks

[Peter]

I was there but they were hardly capable of keeping the road cleared..
Its these "happenings" that fuck it up for the rest of us...
i think if the cops see it, the organizers will have troubles for next years to organize in the future..
is that so hard to understand?

[pimp incher too]

I was there but they were hardly capable of keeping the road cleared..
Its these "happenings" that fuck it up for the rest of us...
i think if the cops see it, the organizers will have troubles for next years to organize in the future..
is that so hard to understand?

i think the cops see enough on sunday to cancel the show,the home made catapult shooting with apple on the copcar and hit,a big dent in the side! drinking alcohol and driving! that is not good for reputation!
keep on topic,if you want to discuse this scratching happening open your own topic.

[SteveW]

a lot friends from us keep the road cleared so we can passed safe and nothing happend. about the cabriolet,the guy whas drunken and had no insurance,i hope this is a lesson for everybody!

so,keep on topic pleasse.

thanks

To go off topic again, luckily for us the guy did have insurance but that's not the point, I don't care if the 'road was cleared' it's not big and it's not clever, things can happen and people get hurt. And yes it f'ing hurt. Grow up and keep the racing to the track.. 

[Jim Ratto]

ruff what is your avatar?

[Peter]

its a girl in Autohaus
It was posted in the Autohaus thread i think...

[Rick Meredith]

its a girl in Autohaus
It was posted in the Autohaus thread i think...

She's probably someones grandmother by now! 

[stealth67vw]

its a girl in Autohaus
It was posted in the Autohaus thread i think...

Where was that originally posted? I've looked for hours on end after seeing it the first time and I can't find it.

[Rick Meredith]

I think it was the thread started by John Lazenby.