Ok here we go need to get some stuff gone to give me some more funds for more go faster goodie's
First up is this bolt in mid mount . Simply bolts on to the gearbox casing and presses against the underside of the framehorns via 2 urethane bushes. Reduces gearbox twist and nose lift.No welding is required, but longer studs or bolts (not supplied) need fitting to the gearbox. £30
Set of machined out 44mm venturi's for 48 ida's , these have been done well as they start out at the thinest point 44mm and fan out to 46 at the base £40
Good pair of used 135 ZX Michelin with a good 4 to 5 mm of even tread £85
A 7000 rpm VDO 115mm tacko from a 914 I think , the good thing about this is that it will fit steight into a 58 > speedo hole wire's up to the coil just needs a bit of a clean and detail £40
And once you have fitted the tacko you will need this 100mm 180 kph VDO trip speedo
all good just need clean and detail £40
Continental 135 70 15 ( smart car tyres ) all good loads of tread perfect for the strip
£50
Can ship all of the above , more bits to follow