pictures many more of anything apon request.
http://www.thesamba.com/vw/classifieds/detail.php?id=4416401959 karman ghia low light offered at 35,000.00
Hot VW, VOLKS World, ULTRA VW Featured car SHOW WINNER
only 400 miles on car since 10 point resto and 200 miles on est. 180hp 2110
painted and restored by Chris Morgan
painted original two tone cardinal red w/ black top
german square weave interior
restored steering wheel
orginal yellow and black california plates
custom bend gene berg locking shifter
custom gauge cluster painted to match looks really good w/ 3 auto meter gauges
oil pressure, oil temp and tach
full body off restoration:
pan has been powdercoated semi-gloss black
all new brake lines, brakes, everthing ... the works
holly blue fuel pump w/ 3/8 line
Early Fuchs fresh polish and paint
early 4.5" up front wrapped in 135's
early 6" in the back with 195 60's
with a 5.5" spare
restored powder coated stock vw beam with welded in adjusters and drop spindles
this car sits perfect with a quality ride a very drivable height
transmission:
stock ratio 4:37
super diff
heavy duty side cover
welded gears
engine:
82x90.5 2110
german thick back case
8.5:1 compression
5.352 porche lengh eagle rods w/ arp 2000 bolts
demello welded stroker crank vw journal 11/32 berg dowells
w/ 12.5 gene berg flywheel w/ stage one kep w/ dual friction disc
complete balance by gene berg machine shop
engle k-8 cam w/ scat 1.4 ratio rockers and manton pushrods
90.5 cima mahle piston and cylinders with total seal second ring
041 heads by jeff denham 44x37.5 non welded triple springs with Ti retainers
w/ match ported polished scat tracks
Early italian weber 48ida's w/ 40mm chokes and chrome velocity stacks w/ gene berg chrome linkage
vw audi vertex industrail magneto roger crawford magneto clamp *polished*
painted engine tin with anodized backing washers with polished button head bolts
gene berg *polished* 3.5qt sump polished stainless pushrod tubes
this egine only has 200 miles on it est. 160 @ rear wheel or est. 180hp @ crank
for serious inquires please call Jim @ 714-296-4885