Hi,
Admittedly not the most "cal-look" question, but I'm becoming a bit desperate...

I'm currently puzzling togheter my -62, freshly painted (well, last spring

) and I sold off the glassfiber fenders that was previously on the car, and replaced these for some original steel from a -60 yearmodel. Unfortunately I did not take any measurments as for the placement of the rear/tail light housings from the old fenders, and neither did I mock-up the -62 lights on the -60 fenders before shipping off to my painter (yeah, bad mistake but that's the way things are)... under the impression that those measurements would be easy to find. But, now I've scanned throught my Bentley book, and I have one page with some scetchy measures on how to "upgrade" from earlier tail-lights to the ones found from -62 onwards (but it is not really sufficient for my needs at the moment...)

Unfortunatley the previous owner of the fenders has had some custom lights, I believe Ford teardrops, and I can't really tell a hole from a hole if you know what I mean. On one fender the -62 housing do actually line up reasonably in the current holes, but not on the other, and I just want to double-check this before I "screw" (no pun intended!) this one up...
So far I have found little info and pics on this on the WWW, so I'm reaching out to anyone who could help out in finding some good measurements (preferably in metrics!

)... I have some dodgy pics on placement and measurement on earlier (ovals) and pre -61 but I want to get some more input on this one. Preferalby with distances from lip of fenders, side to side, bottom edge, from edge to body, pics would be great etc... well, anything really!
Thanks in advance!
Br,