The Cal-look Lounge
Welcome, Guest. Please login or register.
Did you miss your activation email?
November 26, 2024, 11:01:56 am

Login with username, password and session length
Thank you for your support!
Search:     Advanced search
351221 Posts in 28657 Topics by 6854 Members
Latest Member: 74meanmachine
* Home This Year's European Top 20 lists All Time European Top 20 lists Search Login Register
+  The Cal-look Lounge
|-+  Cal-look/High Performance
| |-+  Pure racing
| | |-+  5.5" Rods --86mm stroke ?
« previous next »
Pages: [1] Print
Author Topic: 5.5" Rods --86mm stroke ?  (Read 3660 times)
T11964
Jr. Member
**
Posts: 63



« on: March 25, 2008, 08:44:16 am »

Have a 86mm Berg Crank  and a set 5.5 Carrillo , bought  years ago at Bergs.
I now has 2. thoughts about the lenght off rods , now all uses longer rods.
 When I bought it ,Bergs said that this was what they recommended.
Any opinions on this ?
Logged
richie
Hero Member
*****
Posts: 5687



« Reply #1 on: March 25, 2008, 10:14:25 am »

What application? Race? street?  daily driver? I would just run it,they are both quality products,

cheers richie,uk
Logged

Cars are supposed to be driven, not just talked about!!!   


Good parts might be expensive but good advice is priceless Wink
jr59
Full Member
***
Posts: 126



WWW
« Reply #2 on: March 25, 2008, 11:41:25 am »

Hi,
well the 5.500" rod you have are good for the 86mm crank.Of course it's quite triky when it's time to put the piston and cylinder with this combo (you will have to chek piston skirt clearanca at BDC).
I run this combo and works very fine!!.You will have more side load on the cylinder with those short rod comparing with the longer available today.And of course to go upper than 7500rpm longer would be better so as aked you ritchie,for what use is the engine?
ps:if you decide to go other rod please tell me Grin Grin
Logged

T11964
Jr. Member
**
Posts: 63



« Reply #3 on: March 25, 2008, 12:50:15 pm »

Thanks for your replyes .
Street is what it`s all about (maybe 1 go at the strip)
jr59 , the rods are for Buick/porsche journals and the crank has all T4 mains.
Engine will be 86x 4" with JPM heads ( got them thursday , yahoo).
                           Regards Claus.
Logged
oldbug
Full Member
***
Posts: 219



« Reply #4 on: April 02, 2008, 06:14:36 am »

hi claus,
have you got pictures of your JPM heads, just for fun ? Wink
Logged

Laurent
John Rayburn
Hero Member
*****
Posts: 2481


Der Kleiner Panzers


« Reply #5 on: April 09, 2008, 04:51:25 am »

I like short rods in a heavy street car. It will build the torque your car needs to get moving.
Logged

I also park at Nick's.
T11964
Jr. Member
**
Posts: 63



« Reply #6 on: April 10, 2008, 00:03:09 am »

Thanks , good to hear some feedback on this.
Logged
Pages: [1] Print 
« previous next »
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!