The Cal-look Lounge
Welcome, Guest. Please login or register.
Did you miss your activation email?
December 12, 2024, 05:19:03 am

Login with username, password and session length
Thank you for your support!
Search:     Advanced search
351267 Posts in 28664 Topics by 6857 Members
Latest Member: aegoroff
* Home This Year's European Top 20 lists All Time European Top 20 lists Search Login Register
+  The Cal-look Lounge
|-+  Cal-look/High Performance
| |-+  Pure racing
| | |-+  Oxyboxer questions?
« previous next »
Pages: [1] Print
Author Topic: Oxyboxer questions?  (Read 4954 times)
FIDDE
Jr. Member
**
Posts: 68


« on: October 25, 2009, 22:09:52 pm »

I have some questions about an oxyboxer case,first is it possiple to machine down the deck 10mm on
both sides to get the right deck.And does the 94 bore typ1 cylinders fit in the case without
machine job.Im aware of the wider headstuds.

/F

Logged
stealth67vw
Hero Member
*****
Posts: 2261



« Reply #1 on: October 25, 2009, 22:53:46 pm »

Your more likely to get more responses here:

http://www.shoptalkforums.com/viewforum.php?f=37&sid=f97e5332057f411fde1947e4fd62cc88
Logged

John Bates
JB Machining Services
1967 street bug 2020lbs w/driver
12.34 @ 108 mph 1/4
7.76 @ 89mph 1/8
RMS Boxer Service
Sr. Member
****
Posts: 308


WWW
« Reply #2 on: October 25, 2009, 23:13:25 pm »

I have some questions about an oxyboxer case,first is it possiple to machine down the deck 10mm on
both sides to get the right deck.And does the 94 bore typ1 cylinders fit in the case without
machine job.Im aware of the wider headstuds.

/F


No milling the case down 10 mm on each side will weaken the case too much in numerous places.
No the 94 mm type 1 cylinders wound't fit, but due to the wbx case is wider the cylinders have
to be machined in the case end. The cylinders can now be machined to fit the spigot bore in
the wbx case.

/Rolf
Logged
FIDDE
Jr. Member
**
Posts: 68


« Reply #3 on: October 26, 2009, 12:33:58 pm »

Ok... thanks for the info  Smiley I have a Demello 84 race crank and CB 5.5 H rods that im going
to use.Maybe it's to much job to go on a oxy,im looking at different case options.
Logged
RMS Boxer Service
Sr. Member
****
Posts: 308


WWW
« Reply #4 on: October 26, 2009, 17:00:31 pm »

Ok... thanks for the info  Smiley I have a Demello 84 race crank and CB 5.5 H rods that im going
to use.Maybe it's to much job to go on a oxy,im looking at different case options.

It's a near perfect combo for an oxy boxer Smiley. Machining the cylinder to fit the spigot
bores and deck height is the same as any other combo.  Just go for it  Grin


/Rolf
Logged
Udo
Hero Member
*****
Posts: 2077



« Reply #5 on: October 26, 2009, 19:30:57 pm »

94mm Type 4 cylinders fit in the WBX case . You only have to do some work on them

Udo
Logged

FIDDE
Jr. Member
**
Posts: 68


« Reply #6 on: October 27, 2009, 10:00:45 am »

Do they seal properly? typ1 cylinder
« Last Edit: October 27, 2009, 13:27:20 pm by FIDDE » Logged
RMS Boxer Service
Sr. Member
****
Posts: 308


WWW
« Reply #7 on: October 27, 2009, 17:10:50 pm »

Yes they seal very fine as long as the machine work is done correctly. Sealing surfaces in the top and in the botton of
the cylinder have to be parallel. On the 101,6x86 oxy engine I have build for a friend we ended up with less sealing surface
than 94 mm cylinder proberly will have and the engine is not leaking.

/Rolf
Logged
FIDDE
Jr. Member
**
Posts: 68


« Reply #8 on: October 28, 2009, 11:15:48 am »

Ok,,what´s the difference between the bearings,can i use all year models of the case 86-91.Is it the early case that have
1mm+ on the flywheel bearing for typ1 crank,or is it the same?

/F
Logged
Pages: [1] Print 
« previous next »
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!