The Cal-look Lounge
Welcome,
Guest
. Please
login
or
register
.
Did you miss your
activation email?
November 01, 2024, 00:49:07 am
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
Thank you for your support!
Search:
Advanced search
351146
Posts in
28650
Topics by
6850
Members
Latest Member:
Bugstar70_new
The Cal-look Lounge
Cal-look/High Performance
Cal-look
Engine and parts help... mild road engine project
« previous
next »
Pages:
1
...
13
14
[
15
]
16
Author
Topic: Engine and parts help... mild road engine project (Read 156464 times)
qubek
Sr. Member
Posts: 300
Re: Engine and parts help... mild road engine project
«
Reply #420 on:
July 10, 2012, 11:41:58 am »
I don't know what is this thing that is dragging you away from VW's but... wouldn't you prefer at least to finish what you have started? I don't know if it's still important for you, but even if you will resign (hopefully not) from the hobby, at least you're able to say that you did it, and not that you've been walking around this engine project for years without having it done, without success. Especially that you're that close.
As for some of your questions... I don't feel entitled to advise you, because in my opinion the fact that I have done something in a given way doesn't mean that a different solution is worse or as good as the one chosen by me. I think that in most cases when you have a dilemma, both your ideas make sense. Those engines our there... most of them are not efficient (just compare them to what Johannes does) but they run well and their users as satisfied.
Logged
I have repro BRMs and I'm proud! :]
Nico86
Hero Member
Posts: 6354
Turnip engine.
Re: Engine and parts help... mild road engine project
«
Reply #421 on:
July 10, 2012, 23:30:41 pm »
Quote from: qubek on July 10, 2012, 11:41:58 am
I don't know what is this thing that is dragging you away from VW's but... wouldn't you prefer at least to finish what you have started? I don't know if it's still important for you, but even if you will resign (hopefully not) from the hobby, at least you're able to say that you did it, and not that you've been walking around this engine project for years without having it done, without success. Especially that you're that close.
Honestly, I don't really know if I'll do it or not... I'm far away from it, these days I only feel glad I didn't sold the car considering the stupid an weird things I've done. Though today I stumbled upon a NOS S&S dual quiet-pack with its extractor for sale. Exactly the one I want, the size I would need for this engine, non-merged and with un-flared and un-chromed tips (as I prefer the black ones). I ask the guy for price and shipping and I'll see, it's tempting
And since past autumn I have all the parts ready, balanced and checked at home, waiting to already assemble the long-block (without the heads that I have to rework).
Quote from: qubek on July 10, 2012, 11:41:58 am
As for some of your questions... I don't feel entitled to advise you, because in my opinion the fact that I have done something in a given way doesn't mean that a different solution is worse or as good as the one chosen by me. I think that in most cases when you have a dilemma, both your ideas make sense. Those engines our there... most of them are not efficient (just compare them to what Johannes does) but they run well and their users as satisfied.
I choose the SLR XV290 cam because it's 'sharper' than the Engle W110 and would allow me to be able to replace my 'home made' stock-sized heads and 40IDF to bigger and proper heads and carbs one day without putting the whole engine apart. This cam may seem slightly 'oversized' but I guess it would be a fun engine to drive anyway. Plus I have the matching SLR-Wiesmann lifters coming with the cam so...
I think I'll use the XV290, but at the point I am now, I will have the heads cut for dual springs, this will be the only thing that I will not do by myself on the this engine (along with balancing the crank and accessories) but it will be safer. Maybe I will hate this cam and change for a W110-like with single springs later... But at least I will not break and ruin everything by running single springs with a sharp cam. And it's true, as long as it runs well and don't broke-down, I think it could be a nice engine.
«
Last Edit: July 10, 2012, 23:36:21 pm by Nico86
»
Logged
The Threads Thread :
http://cal-look.no/lounge/index.php/topic,14644.0.html
qubek
Sr. Member
Posts: 300
Re: Engine and parts help... mild road engine project
«
Reply #422 on:
July 11, 2012, 05:19:58 am »
But this XV 290 is not a monster of a cam is it? I know that people used to "over-cam" engines and this is why everybody are talking about not doing it now. But my impression is that people are talking about not over-caming the engines for so many years, that they started to be afraid of "hotter" cams and are very often building "bus-engines", even if it is not necessary. I'm not an expert and I may be wrong, but even if this cam is not the best cam for the application (and I'm not saying that this is the case) I don't think it's that far off that you would hate it.
Logged
I have repro BRMs and I'm proud! :]
Nico86
Hero Member
Posts: 6354
Turnip engine.
Re: Engine and parts help... mild road engine project
«
Reply #423 on:
July 11, 2012, 21:50:57 pm »
Quote from: qubek on July 11, 2012, 05:19:58 am
But this XV 290 is not a monster of a cam is it? I know that people used to "over-cam" engines and this is why everybody are talking about not doing it now. But my impression is that people are talking about not over-caming the engines for so many years, that they started to be afraid of "hotter" cams and are very often building "bus-engines", even if it is not necessary. I'm not an expert and I may be wrong, but even if this cam is not the best cam for the application (and I'm not saying that this is the case) I don't think it's that far off that you would hate it.
No it's not a monster, I'll post the specs sheet later. It's just sharper that the commonly used 'mid-range W110'. Plus I'll use it with 1.1:1 rockers. Hating the XV290 and having to put the engine apart to replace it isn't the thing that would bother me the most, but breaking and ruining everything because of wrong springs would p*ss me off! So I will just play it safe and use dual valve springs, now I don't mind to have to pay for the heads to be cutted for duals.
And I think you're right, maybe it risks to be not the 'perfect engine', but it will certainly be a looooooot more fun to drive than the stock 1300-single-port engine I have in the car since years.
Logged
The Threads Thread :
http://cal-look.no/lounge/index.php/topic,14644.0.html
Zach Gomulka
Hero Member
Posts: 6991
Don't piss down my back and tell me it's raining.
Re: Engine and parts help... mild road engine project
«
Reply #424 on:
July 12, 2012, 00:24:38 am »
That cam is great for the current combo, and if you ever decide to upgrade the top end it will really wake up!
Logged
Born in the '80s, stuck in the '70s.
bugnut68
Hero Member
Posts: 1751
Re: Engine and parts help... mild road engine project
«
Reply #425 on:
July 12, 2012, 00:54:28 am »
Quote from: Nico86 on July 10, 2012, 23:30:41 pm
Quote from: qubek on July 10, 2012, 11:41:58 am
I don't know what is this thing that is dragging you away from VW's but... wouldn't you prefer at least to finish what you have started? I don't know if it's still important for you, but even if you will resign (hopefully not) from the hobby, at least you're able to say that you did it, and not that you've been walking around this engine project for years without having it done, without success. Especially that you're that close.
Honestly, I don't really know if I'll do it or not... I'm far away from it, these days I only feel glad I didn't sold the car considering the stupid an weird things I've done. Though today I stumbled upon a NOS S&S dual quiet-pack with its extractor for sale. Exactly the one I want, the size I would need for this engine, non-merged and with un-flared and un-chromed tips (as I prefer the black ones). I ask the guy for price and shipping and I'll see, it's tempting
And since past autumn I have all the parts ready, balanced and checked at home, waiting to already assemble the long-block (without the heads that I have to rework).
Quote from: qubek on July 10, 2012, 11:41:58 am
As for some of your questions... I don't feel entitled to advise you, because in my opinion the fact that I have done something in a given way doesn't mean that a different solution is worse or as good as the one chosen by me. I think that in most cases when you have a dilemma, both your ideas make sense. Those engines our there... most of them are not efficient (just compare them to what Johannes does) but they run well and their users as satisfied.
I choose the SLR XV290 cam because it's 'sharper' than the Engle W110 and would allow me to be able to replace my 'home made' stock-sized heads and 40IDF to bigger and proper heads and carbs one day without putting the whole engine apart. This cam may seem slightly 'oversized' but I guess it would be a fun engine to drive anyway. Plus I have the matching SLR-Wiesmann lifters coming with the cam so...
I think I'll use the XV290, but at the point I am now, I will have the heads cut for dual springs, this will be the only thing that I will not do by myself on the this engine (along with balancing the crank and accessories) but it will be safer. Maybe I will hate this cam and change for a W110-like with single springs later... But at least I will not break and ruin everything by running single springs with a sharp cam. And it's true, as long as it runs well and don't broke-down, I think it could be a nice engine.
I flip-flopped for awhile as to whether to continue with my current 2017 build... I can say, it's really easy to get discouraged and frustrated when things go to hell. Only reason I'm continuing my build is because John Bates gave me a SCREAMING deal on another case. Otherwise I would have had no problem parting it out and being done with things for now.
Sometimes it just takes a bit of time to get away from things to gain perspective, too. Even if a guy ultimately decides to go down a different path, it's not the end of the world, by any means... most VW guys always wind up coming back eventually.
Logged
Nico86
Hero Member
Posts: 6354
Turnip engine.
Re: Engine and parts help... mild road engine project
«
Reply #426 on:
July 12, 2012, 23:51:59 pm »
Quote from: Zach Gomulka on July 12, 2012, 00:24:38 am
That cam is great for the current combo, and if you ever decide to upgrade the top end it will really wake up!
Yes
Quote from: bugnut68 on July 12, 2012, 00:54:28 am
I flip-flopped for awhile as to whether to continue with my current 2017 build... I can say, it's really easy to get discouraged and frustrated when things go to hell. Only reason I'm continuing my build is because John Bates gave me a SCREAMING deal on another case. Otherwise I would have had no problem parting it out and being done with things for now.
Sometimes it just takes a bit of time to get away from things to gain perspective, too. Even if a guy ultimately decides to go down a different path, it's not the end of the world, by any means... most VW guys always wind up coming back eventually.
(glad to know you've got another case)
Logged
The Threads Thread :
http://cal-look.no/lounge/index.php/topic,14644.0.html
Nico86
Hero Member
Posts: 6354
Turnip engine.
Re: Engine and parts help... mild road engine project
«
Reply #427 on:
July 19, 2012, 23:08:41 pm »
So I bought this NOS S&S dual quiet-pack, must receive it in a couple of weeks.
Logged
The Threads Thread :
http://cal-look.no/lounge/index.php/topic,14644.0.html
Nico86
Hero Member
Posts: 6354
Turnip engine.
Re: Engine and parts help... mild road engine project
«
Reply #428 on:
July 26, 2012, 18:50:20 pm »
.
Logged
The Threads Thread :
http://cal-look.no/lounge/index.php/topic,14644.0.html
Nico86
Hero Member
Posts: 6354
Turnip engine.
Re: Engine and parts help... mild road engine project
«
Reply #429 on:
July 26, 2012, 18:51:13 pm »
.
Logged
The Threads Thread :
http://cal-look.no/lounge/index.php/topic,14644.0.html
bugnut68
Hero Member
Posts: 1751
Re: Engine and parts help... mild road engine project
«
Reply #430 on:
July 26, 2012, 20:25:35 pm »
Quote from: Nico86 on July 12, 2012, 23:51:59 pm
Quote from: Zach Gomulka on July 12, 2012, 00:24:38 am
That cam is great for the current combo, and if you ever decide to upgrade the top end it will really wake up!
Yes
Quote from: bugnut68 on July 12, 2012, 00:54:28 am
I flip-flopped for awhile as to whether to continue with my current 2017 build... I can say, it's really easy to get discouraged and frustrated when things go to hell. Only reason I'm continuing my build is because John Bates gave me a SCREAMING deal on another case. Otherwise I would have had no problem parting it out and being done with things for now.
Sometimes it just takes a bit of time to get away from things to gain perspective, too. Even if a guy ultimately decides to go down a different path, it's not the end of the world, by any means... most VW guys always wind up coming back eventually.
(glad to know you've got another case)
Yup... everyone's got a breaking point, and I've come close to mine. I've never fought an engine build like I have with this 2017. It's almost as though there's a higher power speaking to me, telling me it's time to move on to other things for the time being. Just recently pinched a main bearing and have to get the pin drilled out. My issue is largely the lack of nearby resources... I've just recently discovered a guy that does good work and has a good reputation that lives about three hours away; for me that's as nearby as it gets. lol.
Logged
Nico86
Hero Member
Posts: 6354
Turnip engine.
Re: Engine and parts help... mild road engine project
«
Reply #431 on:
July 28, 2012, 17:30:19 pm »
Quote from: bugnut68 on July 26, 2012, 20:25:35 pm
Quote from: Nico86 on July 12, 2012, 23:51:59 pm
Quote from: Zach Gomulka on July 12, 2012, 00:24:38 am
That cam is great for the current combo, and if you ever decide to upgrade the top end it will really wake up!
Yes
Quote from: bugnut68 on July 12, 2012, 00:54:28 am
I flip-flopped for awhile as to whether to continue with my current 2017 build... I can say, it's really easy to get discouraged and frustrated when things go to hell. Only reason I'm continuing my build is because John Bates gave me a SCREAMING deal on another case. Otherwise I would have had no problem parting it out and being done with things for now.
Sometimes it just takes a bit of time to get away from things to gain perspective, too. Even if a guy ultimately decides to go down a different path, it's not the end of the world, by any means... most VW guys always wind up coming back eventually.
(glad to know you've got another case)
Yup... everyone's got a breaking point, and I've come close to mine. I've never fought an engine build like I have with this 2017. It's almost as though there's a higher power speaking to me, telling me it's time to move on to other things for the time being. Just recently pinched a main bearing and have to get the pin drilled out. My issue is largely the lack of nearby resources... I've just recently discovered a guy that does good work and has a good reputation that lives about three hours away; for me that's as nearby as it gets. lol.
Yep I know what you mean. Well I received this dual quiet pack who looks great so it's giving some kind of motivation
And tomorrow I'm gonna pick up another '68 bug I bought during the week and I'll use it as a my new daily driver, so after having almost sold my Beetle this spring I'll now have two and I'll be able to work on the other one and this engine
«
Last Edit: July 28, 2012, 17:33:47 pm by Nico86
»
Logged
The Threads Thread :
http://cal-look.no/lounge/index.php/topic,14644.0.html
bugnut68
Hero Member
Posts: 1751
Re: Engine and parts help... mild road engine project
«
Reply #432 on:
July 29, 2012, 00:42:10 am »
That's a pretty old set-up... I know S&S had the flared tips for the longest time, but I remember seeing ads in early '80s and late '70s Hot VWs with the non-flared tips. Amazing it's survived that long unused!
Logged
Nico86
Hero Member
Posts: 6354
Turnip engine.
Re: Engine and parts help... mild road engine project
«
Reply #433 on:
July 31, 2012, 22:16:20 pm »
Quote from: bugnut68 on July 29, 2012, 00:42:10 am
That's a pretty old set-up... I know S&S had the flared tips for the longest time, but I remember seeing ads in early '80s and late '70s Hot VWs with the non-flared tips. Amazing it's survived that long unused!
I like the fact that it's got non-flarred and non-chromed tips
Logged
The Threads Thread :
http://cal-look.no/lounge/index.php/topic,14644.0.html
bugnut68
Hero Member
Posts: 1751
Re: Engine and parts help... mild road engine project
«
Reply #434 on:
July 31, 2012, 22:23:56 pm »
I think about the only thing you can get as far as "merged" dual QPs now are made by Bugpack... they have the chromed, non-flared tips, last I checked... I've always liked the flared tips more, though
Logged
Nico86
Hero Member
Posts: 6354
Turnip engine.
Re: Engine and parts help... mild road engine project
«
Reply #435 on:
August 01, 2012, 12:41:57 pm »
Quote from: bugnut68 on July 31, 2012, 22:23:56 pm
I think about the only thing you can get as far as "merged" dual QPs now are made by Bugpack... they have the chromed, non-flared tips, last I checked... I've always liked the flared tips more, though
Yes. Flat 4 sells a dual as well, but I've never been able to find one anywhere, it comes with chromed and flared tips. CSP has a stainless steel one in their own exhaust range.
I've found some NOS or slightly used ones for sale, but most of the time it seems they were large flange
And I don't know if Berg made them for small flange.
Finally this S&S is for a small flange header.
«
Last Edit: August 01, 2012, 12:44:57 pm by Nico86
»
Logged
The Threads Thread :
http://cal-look.no/lounge/index.php/topic,14644.0.html
bugnut68
Hero Member
Posts: 1751
Re: Engine and parts help... mild road engine project
«
Reply #436 on:
August 01, 2012, 18:40:00 pm »
None of the vendors here in the U.S. carry the Flat4 mufflers, near as I can tell... not to say they couldn't order them, but I do like that style/design.
Logged
Nico86
Hero Member
Posts: 6354
Turnip engine.
Re: Engine and parts help... mild road engine project
«
Reply #437 on:
February 26, 2016, 02:52:10 am »
Project pending, but still going
I just have moved to a new place so hopefully I'll be able to keep going with it in a few months.
At the end of last year I got another set of 40IDF, rebuilt and ready to go with a set of jets. I once again did a list of everything I have and what I need to get. Mostly I'm just missing a few of the small engine tin parts, a Bosch blue coil, pushrods, a generator and I have to have my heads modified for unleaded gas.
I am still unsure about whether to use single or dual valve springs with the SLR XV290 cam, also deciding about which pushrods to use (whether aluminium or steel) will also depend on this
Logged
The Threads Thread :
http://cal-look.no/lounge/index.php/topic,14644.0.html
Nico86
Hero Member
Posts: 6354
Turnip engine.
Re: Engine and parts help... mild road engine project
«
Reply #438 on:
March 10, 2016, 12:10:09 pm »
Quote from: Nico86 on February 26, 2016, 02:52:10 am
I am still unsure about whether to use single or dual valve springs with the SLR XV290 cam, also deciding about which pushrods to use (whether aluminium or steel) will also depend on this
I've been checking again my notes and infos I got, and I really need more infos/inputs about this. My first thought was to go with Berg single valve springs, and aluminium pushrods... but I am still undediced.
Anyone?
Edit : I got in my notes Bugpack 4046 dual springs
«
Last Edit: March 10, 2016, 12:35:26 pm by Nico86
»
Logged
The Threads Thread :
http://cal-look.no/lounge/index.php/topic,14644.0.html
Dougy Dee
Full Member
Posts: 154
Re: Engine and parts help... mild road engine project
«
Reply #439 on:
March 10, 2016, 14:19:45 pm »
Quote from: Nico86 on March 10, 2016, 12:10:09 pm
Quote from: Nico86 on February 26, 2016, 02:52:10 am
I am still unsure about whether to use single or dual valve springs with the SLR XV290 cam, also deciding about which pushrods to use (whether aluminium or steel) will also depend on this
I've been checking again my notes and infos I got, and I really need more infos/inputs about this. My first thought was to go with Berg single valve springs, and aluminium pushrods... but I am still undediced.
Anyone?
Edit : I got in my notes Bugpack 4046 dual springs
My understanding and opinion is 'dual carbs, dual springs'. A single carb, single spring, engine only revs so fast. Make it breathe, add dual carbs, and now its bouncing valves off the seats as the singles cant control the bounce harmonics.
Also, dont kid yourself about that XV290. It specs out more like an Engle 120 on steroids. 252 duration @ .050 and .419 cam lift...It'll be FUN.
Logged
Nico86
Hero Member
Posts: 6354
Turnip engine.
Re: Engine and parts help... mild road engine project
«
Reply #440 on:
March 10, 2016, 15:12:19 pm »
Quote from: Dougy Dee on March 10, 2016, 14:19:45 pm
Quote from: Nico86 on March 10, 2016, 12:10:09 pm
Quote from: Nico86 on February 26, 2016, 02:52:10 am
I am still unsure about whether to use single or dual valve springs with the SLR XV290 cam, also deciding about which pushrods to use (whether aluminium or steel) will also depend on this
I've been checking again my notes and infos I got, and I really need more infos/inputs about this. My first thought was to go with Berg single valve springs, and aluminium pushrods... but I am still undediced.
Anyone?
Edit : I got in my notes Bugpack 4046 dual springs
My understanding and opinion is 'dual carbs, dual springs'. A single carb, single spring, engine only revs so fast. Make it breathe, add dual carbs, and now its bouncing valves off the seats as the singles cant control the bounce harmonics.
Also, dont kid yourself about that XV290. It specs out more like an Engle 120 on steroids. 252 duration @ .050 and .419 cam lift...It'll be FUN.
Thanks for your infos! Do you have any preference about dual springs? Berg, Bugpack 4046?
Logged
The Threads Thread :
http://cal-look.no/lounge/index.php/topic,14644.0.html
Iryanu
Full Member
Posts: 188
Re: Engine and parts help... mild road engine project
«
Reply #441 on:
March 10, 2016, 15:14:52 pm »
Quote from: Nico86 on March 10, 2016, 12:10:09 pm
Quote from: Nico86 on February 26, 2016, 02:52:10 am
I am still unsure about whether to use single or dual valve springs with the SLR XV290 cam, also deciding about which pushrods to use (whether aluminium or steel) will also depend on this
I've been checking again my notes and infos I got, and I really need more infos/inputs about this. My first thought was to go with Berg single valve springs, and aluminium pushrods... but I am still undediced.
Anyone?
Edit : I got in my notes Bugpack 4046 dual springs
I have some stateside single springs in my engine. I don't know if the spec checks out for you as they were chosen for me.
This is not an ordinary uprated valve spring, the material used SWOSC-V, is the best available in todays manufacturing industry and the same wire quality as used in the Japan motorcycle industry.
Using modern day manufacturing processes we have been able to achieve a valve spring that gives huge travel before coil bind and will not distort or loose poundage rates common with the typical import springs. From the installed height this spring gives good progression in poundage rates. The high quality wire used is 4.3mm on the outer spring and 3.1mm on the inner spring, the manufacturing process includes and heat treatment two times to safe guard against fatigue.
These will fit all Type 1 cylinder heads and Type 4 with minor guide boss machining.
Full range of base shim sizes available to suit T1 and T4 cylinder heads
In House Testing
Using light weight valve train parts we have thoroughly tested these springs on Type 4 engines running 86B Web camshafts with just the single valve spring. We have also tested them on type 1 engines with Web 86A & 86B camshafts with 1.4 ratio rocker arms on just the single valve spring.
Checking pressures using Longacre digital spring testing equipment:
Single spring
In a single spring form measured at installed 1.50" 111lbs
0.400 219lbs 0.450 234lbs 0.500 247lbs 0.550 263lbs
Duel spring
In dual spring form installed at 1.53" 149lbs
0.400 297lbs 0.450 342lbs 0.500 367lbs 0.550 391lbs 0.600 415lbs
Coil bind at 0.712
Installed heights can be altered to allow more or less pressure dependent upon engine requirements.
http://statesidetuning.com/newproducts.html
Logged
Nico86
Hero Member
Posts: 6354
Turnip engine.
Re: Engine and parts help... mild road engine project
«
Reply #442 on:
March 10, 2016, 15:20:53 pm »
Quote from: Iryanu on March 10, 2016, 15:14:52 pm
I have some stateside single springs in my engine. I don't know if the spec checks out for you as they were chosen for me.
Thanks for the info, what are your engine and valve train specs?
Logged
The Threads Thread :
http://cal-look.no/lounge/index.php/topic,14644.0.html
Iryanu
Full Member
Posts: 188
Re: Engine and parts help... mild road engine project
«
Reply #443 on:
March 10, 2016, 15:37:40 pm »
Quote from: Nico86 on March 10, 2016, 15:20:53 pm
Quote from: Iryanu on March 10, 2016, 15:14:52 pm
I have some stateside single springs in my engine. I don't know if the spec checks out for you as they were chosen for me.
Thanks for the info, what are your engine and valve train specs?
CB Alu case
84x90.5 2161cc
5.5 H beam
Web 111 camshaft (276° 238° @ at .050" 0.476" lift)
Bolt up rockers 1:1
CB light-weight lifters
Manton pushrods
No idea what casting heads, P&P by RNJ 40x35.5 valves (I think)
44IDF
Nice streetable engine.
«
Last Edit: March 10, 2016, 15:51:07 pm by Iryanu
»
Logged
Nico86
Hero Member
Posts: 6354
Turnip engine.
Re: Engine and parts help... mild road engine project
«
Reply #444 on:
March 10, 2016, 17:17:03 pm »
Thanks for your infos Iryanu (:
Mantons are steel/chromly pushrods right?
Logged
The Threads Thread :
http://cal-look.no/lounge/index.php/topic,14644.0.html
Martin S.
Hero Member
Posts: 990
Re: Engine and parts help... mild road engine project
«
Reply #445 on:
March 10, 2016, 17:21:51 pm »
I'll never use crmo pushrods again. They are just too noisy.
Logged
Cal Look white 68 Bug with AJ Sims EFI Turbo 2332. 194hp 240tq @ 5500 rpm 3psi boost.
Nico86
Hero Member
Posts: 6354
Turnip engine.
Re: Engine and parts help... mild road engine project
«
Reply #446 on:
March 10, 2016, 17:25:51 pm »
Quote from: Martin S. on March 10, 2016, 17:21:51 pm
I'll never use crmo pushrods again. They are just too noisy.
That's what I thought too, and why I'm thinking of using aluminium pushrods. Some say they are more fragile? But ain't aluminium supposed to expand while the engine is heating, keeping then valve train settings more accurate?
Logged
The Threads Thread :
http://cal-look.no/lounge/index.php/topic,14644.0.html
Paul Bahnstormerz
Full Member
Posts: 237
Engine and parts help... mild road engine project
«
Reply #447 on:
March 10, 2016, 19:36:04 pm »
I'm using a single HD valve from Stateside Tuning, and a Mercedes inner spring so my poundage is less than regular dual springs. This with ti retainers, scat rockers and aluminium pushrods, carbs are 44IDF and then it's going in laughing gas
http://statesidetuning.com/newproducts.html
Logged
Nico86
Hero Member
Posts: 6354
Turnip engine.
Re: Engine and parts help... mild road engine project
«
Reply #448 on:
March 10, 2016, 19:44:03 pm »
Quote from: Paul Bahnstormerz on March 10, 2016, 19:36:04 pm
I'm using a single HD valve from Stateside Tuning, and a Mercedes inner spring so my poundage is less than regular dual springs. This with ti retainers, scat rockers and aluminium pushrods, carbs are 44IDF and then it's going in laughing gas
http://statesidetuning.com/newproducts.html
Which alu pushrods are you using?
Forgot to mention I'm using Scat 1.1:1 rockers.
Logged
The Threads Thread :
http://cal-look.no/lounge/index.php/topic,14644.0.html
andy198712
Hero Member
Posts: 1063
Re: Engine and parts help... mild road engine project
«
Reply #449 on:
March 10, 2016, 21:42:56 pm »
I'm using the single state side Spring also,
T1, 40x35 044 heads, 86B, CB lightweight followers, stateside's ally pushrods.
Speak to Jim he'll tell you what installed height you want and how much poundage that'll give
A plus is there cheap too!
Logged
Pages:
1
...
13
14
[
15
]
16
« previous
next »
Jump to:
Please select a destination:
-----------------------------
Cal-look/High Performance
-----------------------------
=> Cal-look
=> Pure racing
=> Technical stuff
=> Top Racers lists
=> In Da Werks
-----------------------------
The Cal-look classifieds
-----------------------------
=> For sale!
=> Wanted
-----------------------------
Happenings
-----------------------------
=> Happenings
=> Scandinavian Cal-look Classic (the event)
-----------------------------
Tyre kicking
-----------------------------
=> Off Topic
Loading...