first experience

[papysss]

the first is my experience that "made in Italy "..... <a href="http://www.youtube.com/v/jwydm2TuuPQ" target="_blank">http://www.youtube.com/v/jwydm2TuuPQ</a>

[papysss]

[papysss]

<a href="http://www.youtube.com/v/-_3q_2-0wLU" target="_blank">http://www.youtube.com/v/-_3q_2-0wLU</a>

[Harry/FDK]

Ooff !!!

[Ninho/DKM]

Nice shot man!! considering first out on the strip , engine on test and jet calibration carburators needs..... you will go faster and faster!!!!

[papysss]

thanks luca, all the car has significant room for improvement. I was in the race with no rev limiter, with a bosch distributor 009 and a compression engine with only 10 / 1. I think the next race, go down 'under 11 seconds. I'm very confident.

[papysss]

with these technical improvements, I'm forced to be confident. the difference in weight between the pistons and piston wiseco I have used is' remarkable. also the difference in weight of the flywheel is felt.

[papysss]

I forgot that the carbs will be revisited when will 'use the kit MSD.

[Speed-demon]

What piston is that 430g piston? Who made You that flywheel?

[Diederick/DVK]

cool gasser and very cool engine parts!!
auguri!

[papysss]

430gr by the pistons are produced by an Italian firm on specific cartacio felix, felix and 'a dear friend of Bologna and he has a turbo gasser engine. his record and the fourth of a mile 'to 9.2 seconds. Felix and 'that also build the cylinders by the same company with quality' extreme technologies to 'avant-garde. I did change the flywheel by a Italian company always with my specifications, reducing the weight of the half. 67 Indeed, thanks very much for the compliments .....

[papysss]

As the piston cylinders are also produced in Italy by a specialized firm with specifications dictated by Felix Cartacio. There are both naturally aspirated engines, such as the engine of "Made in Italy" and also for turbo or nitrous

[papysss]

nice to be on the strip ..........

[Harry/FDK]

Beautifull engine parts !!!!

Ciao