The Cal-look Lounge
Welcome, Guest. Please login or register.
Did you miss your activation email?
March 28, 2024, 16:27:51 pm

Login with username, password and session length
Thank you for your support!
Search:     Advanced search
350645 Posts in 28563 Topics by 6811 Members
Latest Member: Bren
* Home This Year's European Top 20 lists All Time European Top 20 lists Search Login Register
+  The Cal-look Lounge
|-+  Cal-look/High Performance
| |-+  Pure racing
| | |-+  30hp Tunning - Hints/Tips/Advise/links Please :)
« previous next »
Pages: [1] Print
Author Topic: 30hp Tunning - Hints/Tips/Advise/links Please :)  (Read 5976 times)
Lee.C
Hero Member
*****
Posts: 6458


I might be an Idiot but I'm not an Arsehole!


« on: July 27, 2011, 23:02:28 pm »

Well as always guys - As the title says  Smiley

For reasons I can't really go into I have to swap the engine on the 51 Split soon, I have a VERY nice totally original 30hp motor from a later oval (54/55 I think Undecided) it has not been run in over 20yrs! despite this I am faithfully assured it is in VERY good shape - It even still has its original VW logo'd fan belt  Smiley

The thing is although I LOVE my vintage speed stuff like empi, racetrim, dds etc - I know almost NOTHING about 30hp tunning  Undecided

I am thinking..........

- A small raise in compression,
- maybe some porting/polishing,
- Dual carbs,
- Fram/356 style oil filter

So what would you do if you were in my position - Your thoughts please guys  Smiley
Logged

You either "Get It" or you don't......
Zach Gomulka
Hero Member
*****
Posts: 6991


Don't piss down my back and tell me it's raining.


« Reply #1 on: July 28, 2011, 00:06:39 am »

Depends on how deep you wanna get... there is a Vintage Performance section on the samba forums worth checking out.
Logged

Born in the '80s, stuck in the '70s.
181
Hero Member
*****
Posts: 632


« Reply #2 on: July 28, 2011, 08:38:50 am »

BBT will soon release its own Pepco supercharger (Roots style) replica kit, bolt on to 30HP, mucho better construction than Judson vane compresor. That should do the trick Grin
Logged
mymedusa
Jr. Member
**
Posts: 74



« Reply #3 on: July 28, 2011, 10:28:51 am »

sell this stuff to the vintage and originalo guys. to make hp out of the 30ps engine will coast way much more than typ1.
a repro pepcp will be very interesting. lets see how much it will be. mix it with repro okrasas and you will have 70 hp and i bet 3000 dollar minimum in heads and supercharger.

i will sell my supercharger (little screemer kit) it in the winter in fact of putting my bigger heads and my bigger supercharger kit on my daily driver. it make all day long 70 hp at 3900 rpm and 150nm( from about 1700-3000 rpm) on stock 36 heads with just more modern exhaust valves in it for sure its a 1192cc stock engine drove 11000km with it. boost all the time Wink
Logged
henk
Hero Member
*****
Posts: 654


« Reply #4 on: July 28, 2011, 10:57:13 am »

here is a pic of it at the BBT stand in chimay.

henk!!!
Logged
Torben Alstrup
Hero Member
*****
Posts: 716


« Reply #5 on: July 29, 2011, 21:45:17 pm »

I´ve been looking down that lane for almost a decade (30 hp tuning) But just never found the time to develop it. Now we have repro Okrasa heads on the market at affordable prices. repro carbs too. I do not know the quality of these though. But the heads have a lot of potential. With a little carefull thinking they will support 90-100 hp easily. I or someone else just need to get around to it. - in fact Joe Ruiz may already "be there"

T
Logged
Zach Gomulka
Hero Member
*****
Posts: 6991


Don't piss down my back and tell me it's raining.


« Reply #6 on: July 29, 2011, 21:51:18 pm »

I can't believe no one has tooled up for big bore kits. A 80mm should fit easy, even an 83mm is well within reason. With the popularity of these motors now, I think they would sell well.
Logged

Born in the '80s, stuck in the '70s.
Jim Ratto
Hero Member
*****
Posts: 7121



« Reply #7 on: July 30, 2011, 06:35:56 am »

Lee, get in touch with Ray Schubert in Mountain View CA he is your best source for information and hot rod parts for 36hp/Denzel/2pc case 356 stuff. Ratio rockers, cams, blowers, ti valves, special springs, manifolds to mount Weber 2bbl carbs on Okrasa heads, or 40PII's

ray@speedwellusa.com

Jim R
Logged
ianmac
Jr. Member
**
Posts: 68


« Reply #8 on: July 30, 2011, 13:12:18 pm »


Being a firm believer that the power is in the heads, I had Jeff Denham (UD) sort me a pair of heads for my 'hot' 30hp, although I don't think he will appreciate me advertising that fact on here as he said they took more work than a set of full blown race heads  Shocked







Logged
Lee.C
Hero Member
*****
Posts: 6458


I might be an Idiot but I'm not an Arsehole!


« Reply #9 on: July 30, 2011, 15:56:23 pm »

Cool thanks for the info guys - I will keep you posted  Smiley
Logged

You either "Get It" or you don't......
mymedusa
Jr. Member
**
Posts: 74



« Reply #10 on: July 30, 2011, 17:42:38 pm »

fact on here as he said they took more work than a set of full blown race heads  Shocked


x2 the bigger a port the more easy you can work on it. the 90° small bow on theintake is such hard to port.

i can't tell but wait till sep. after speedweek. ther you will see the potentioal of full race okrasas.
and also it is all double the work than on typ1 engines.
if somebody is interested i can offer a set of 83mm pistons and liners for 30hp.
Logged
Lee.C
Hero Member
*****
Posts: 6458


I might be an Idiot but I'm not an Arsehole!


« Reply #11 on: July 30, 2011, 17:49:15 pm »

fact on here as he said they took more work than a set of full blown race heads  Shocked



if somebody is interested i can offer a set of 83mm pistons and liners for 30hp.

Hmmmmm what cc does that end up giving Huh Smiley
Logged

You either "Get It" or you don't......
Zach Gomulka
Hero Member
*****
Posts: 6991


Don't piss down my back and tell me it's raining.


« Reply #12 on: July 30, 2011, 18:16:26 pm »

I read that 48's are legal now Smiley

83's give you 1385cc. With a 74 crank you get 1602cc.
Logged

Born in the '80s, stuck in the '70s.
mymedusa
Jr. Member
**
Posts: 74



« Reply #13 on: July 30, 2011, 22:00:31 pm »

and one engine will be running 48's Wink this speedweek but for the most those carbs are way to big and also on this einiges they are just the balls of that bull.
the kit i would offer is best as a 1385cc with stock wide of the engine. an cc and compression ratio plus or with good heads stock okrasas or portet ones single or okrasas depends on the builder. the cylinders i will machine down to the wishes of the costomer. the pistons are kolbenschmidt new originals from the 80's.
if someone will offer some big money i could build a 1700cc that will make some serious power. it's all in the vitrine and boxes Wink
Logged
ianmac
Jr. Member
**
Posts: 68


« Reply #14 on: July 31, 2011, 21:09:43 pm »

kinda something different, check this twin spark plug mod on a hot 30hp motor, I think it's superb Wink

http://www.thesamba.com/vw/forum/viewtopic.php?t=451493
Logged
christophe
Full Member
***
Posts: 241



« Reply #15 on: August 01, 2011, 22:08:37 pm »

If you go to SCC have a talk with hans "besserwisser" landelius.He love this kind of stuff.
I'm pretty sure he is going there.
Logged
PPRMicke
Sr. Member
****
Posts: 369



WWW
« Reply #16 on: August 03, 2011, 15:38:16 pm »

more info from a Swedish 30HP builders see link
http://boxerville.se/forum/viewtopic.php?id=1265

//// Micke
Logged
mymedusa
Jr. Member
**
Posts: 74



« Reply #17 on: August 04, 2011, 10:52:41 am »

more info from a Swedish 30HP builders see link
http://boxerville.se/forum/viewtopic.php?id=1265

//// Micke

bengt holmes (hope i wrote it right) is one of the big names in vintage speed in europe and also on this planet. very nice stuff from him again.

wishes
chris from germany
Logged
danny gabbard
Hero Member
*****
Posts: 2909


gabfab


« Reply #18 on: August 05, 2011, 04:59:18 am »

more info from a Swedish 30HP builders see link
http://boxerville.se/forum/viewtopic.php?id=1265

//// Micke
Very cool stuff ! Very talented !
Logged

A poor craftsman, Blame's it on poor tools.  GAB-FAB shop # 775 246-3069
Pages: [1] Print 
« previous next »
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!