|
Roman
|
 |
« Reply #30 on: September 20, 2006, 22:09:11 pm » |
|
Mine...
|
|
|
|
|
Logged
|
|
|
|
BABOON
SCC Official
Jr. Member
Posts: 95
|
|
« Reply #31 on: September 20, 2006, 23:30:08 pm » |
|
I bought my wrinkle finish spray can from my lokal Harley Davidson dealer. Don`t get surprised if it doesn`t work right away. Wait about 24 hours before the wrinkle treatment is done after the spray
|
|
|
|
|
Logged
|
|
|
|
|
Lee.C
|
|
« Reply #32 on: September 21, 2006, 00:09:49 am » |
|
Cool cheers dude - there are a few bike places near me so I'll give them a go  |
|
|
|
|
Logged
|
You either "Get It" or you don't......
|
|
|
|
Zach Gomulka
|
|
« Reply #33 on: September 21, 2006, 08:10:45 am » |
|
I just use Krylon wrinkle finish black for my Race-Trim/Treuhaft stuff. It comes out nice. I have yet to find out how it holds up to heat though.
|
|
|
|
|
Logged
|
Born in the '80s, stuck in the '70s.
|
|
|
|
Martin Greaves
|
|
« Reply #34 on: September 21, 2006, 22:09:30 pm » |
|
Here the motor in my US67 2109cc may it all the way from England to Das Drag Day #4 and back. Best time of the weekend was a 13.9 1/4 at 98mph with street tyres and a dual quiet pak on.  |
|
|
|
|
Logged
|
Hahaha your killing me.........
|
|
|
|
jick
|
|
« Reply #35 on: September 30, 2006, 12:27:28 pm » |
|
here's mine at the moment.......  |
|
|
|
|
Logged
|
|
|
|
spennyp
Jr. Member
Posts: 88
|
|
« Reply #36 on: October 01, 2006, 19:56:25 pm » |
|
heres a sneaky pic...dont you just love IDA's  especially 51.5's   |
|
|
|
|
Logged
|
Java Green 64 looker....2387cc
|
|
|
fast54vw
Jr. Member
Posts: 76
|
|
« Reply #37 on: October 03, 2006, 06:35:40 am » |
|
Looking good fast54vw!
That wrinkle paint, is it from a rattle can? If so, may I ask which one?
Best rgs
BeetleBug
it is actually powdercoat. here is is finished (well almost) |
|
|
|
|
Logged
|
Its not what you do, its how you do it!
|
|
|
fast54vw
Jr. Member
Posts: 76
|
|
« Reply #38 on: October 03, 2006, 06:37:51 am » |
|
I bought my wrinkle finish spray can from my lokal Harley Davidson dealer. Don`t get surprised if it doesn`t work right away. Wait about 24 hours before the wrinkle treatment is done after the spray
here is the tip with wrinkle paint spray the part heavy but no so heavy that it runs wait about 1-2 minutes max and spray another (2nd) coat the heavier the 2nd coat the more wrinkle you will get |
|
|
|
|
Logged
|
Its not what you do, its how you do it!
|
|
|
|
Lids
|
|
« Reply #39 on: October 03, 2006, 06:59:02 am » |
|
An old pic of my engine, now running berg breather.  |
|
|
|
|
Logged
|
|
|
|
Jon
Administrator
Hero Member
Posts: 3214
12,3@174km/t at Gardermoen 2008
|
|
« Reply #40 on: October 03, 2006, 08:51:27 am » |
|
Looking good fast54vw!
That wrinkle paint, is it from a rattle can? If so, may I ask which one?
Best rgs
BeetleBug
it is actually powdercoat. here is is finished (well almost) Wow, that’s a good looking engine, I really like how low those IDAs sit! Modified or "of the shelf" intake manifolds? I can't get really short intakes for my CE heads, so I'm cutting them down. How does it change the engine characteristics? |
|
|
|
|
Logged
|
Grumpy old men have signatures like this.
|
|
|
|
H67bug
|
|
« Reply #41 on: October 03, 2006, 18:31:03 pm » |
|
 antique silver.. needs new trekker shroud if anyone had one??- pretty please 2332 Comp eliminator heads 48's fk89 Berg 5 |
|
|
|
« Last Edit: October 03, 2006, 18:37:29 pm by H67bug »
|
Logged
|
|
|
|
|
JS
|
|
« Reply #42 on: June 12, 2007, 21:59:08 pm » |
|
Finally my own engine ready! 2276, fk8, original NOS italians, reworked original heads, 6V Bosch 050 ingition. 14,31@146km/t first go @ Mantorp Park, Sweden. Sorry for the 900 fingerprints |
|
|
|
« Last Edit: June 12, 2007, 22:00:49 pm by JS »
|
Logged
|
Signature.
|
|
|
Alan Uyeno
Newbie
Posts: 47
|
|
« Reply #43 on: June 13, 2007, 05:24:45 am » |
|
Heres a current snap shot of my motor this year. I'm praying I'm gonna get consistant 11's with my pumpgas ride.   |
|
|
|
|
Logged
|
|
|
|
|
Shubee2 (DSK)
|
|
« Reply #44 on: June 13, 2007, 14:15:44 pm » |
|
I bought my wrinkle finish spray can from my lokal Harley Davidson dealer. Don`t get surprised if it doesn`t work right away. Wait about 24 hours before the wrinkle treatment is done after the spray
here is the tip with wrinkle paint spray the part heavy but no so heavy that it runs wait about 1-2 minutes max and spray another (2nd) coat the heavier the 2nd coat the more wrinkle you will get Heres another tip if you want it to come out even say if you doing a big part I use a Hair Dryer to warm up the Part First then Spray a Heavy even Coat of paint wait 1 or 2 minutes then Spray it again the more paint you put on the heavier the wrinkle after paint has set about 20 mins on the part I go over it again with hair dryer it will start wrinkling and you can see if you need to recoat any flat or thin spots When I worked at Auto Haus They had a Building used just for packaging Auto Haus,Race Trim and Auto Gear Products they use to Spray all the Race Trim Stuff and then they Baked it in an oven in the Later years of Auto Haus they Stopped Painting all the Race Trim Parts Manifolds,Valve Covers,Breather Boxes,Sump were all Sold and Packaged Bare. |
|
|
|
« Last Edit: June 13, 2007, 19:14:02 pm by Shubee2 (DSK) »
|
Logged
|
Der Selten Kafers VW Club.
Founding Member Est: 1976
58 Ragtop Old School Cal Look
66 Cal Look Drag Car
67 Resto Cal Look
67 Chevy II Nova L79
02 Camaro Vert!
04 Corvette Vert!
04 Colorado Pickup
|
|
|
autobarnhauler
Jr. Member
Posts: 92
|
|
« Reply #45 on: June 15, 2007, 16:17:31 pm » |
|
this engine is in my bus, but i think it looks cool,  camberg, bug-in, there and back again......  |
|
|
|
|
Logged
|
GWB, founder member
.... there and back again, a rocket buses tail....
|
|
|
|
Cheesepanzer
|
|
« Reply #46 on: June 16, 2007, 17:21:50 pm » |
|
Here's a couple of shots... The first is my 2332cc in my old bug and the second is my "street" engine (2054cc) in my Ghia.
|
|
|
|
|
Logged
|
62 Beetle (street/strip build)
63 Type 2 Single Cab
Cornpanzers
|
|
|
Paulus
Jr. Member
Posts: 93
|
|
« Reply #47 on: June 23, 2007, 21:40:15 pm » |
|
My Engine:  |
|
|
|
|
Logged
|
Less is More !
|
|
|
|
JeePee/DVK
|
|
« Reply #48 on: June 24, 2007, 00:05:26 am » |
|
My Engine:
Hi Paul,is he running again? |
|
|
|
|
Logged
|
Type 1 1964 2276cc IDA with Berg-5
|
|
|
Paulus
Jr. Member
Posts: 93
|
|
« Reply #49 on: June 25, 2007, 10:36:51 am » |
|
My Engine:
Hi Paul,is he running again? Nope....There are some problems with the engine, i will tell you later. |
|
|
|
|
Logged
|
Less is More !
|
|
|
|
Sarge
|
|
« Reply #50 on: June 25, 2007, 15:51:06 pm » |
|
Yesterday in the driveway...
|
|
|
|
|
Logged
|
DKP III
|
|
|
|
H67bug
|
|
« Reply #51 on: June 25, 2007, 16:04:35 pm » |
|
Yesterday in the driveway...
Sarge, does that Berg cap come off when driving? I have had 2 come off and now cant find a spare.  |
|
|
|
|
Logged
|
|
|
|
|
Sarge
|
|
« Reply #52 on: June 25, 2007, 16:20:33 pm » |
|
No, can't say that's ever happened. I did replace the cap the breather came with for one I picked up at Pep Boys (the one in the picture) and it's a tight fit.
|
|
|
|
|
Logged
|
DKP III
|
|
|
|
H67bug
|
|
« Reply #53 on: June 25, 2007, 16:46:25 pm » |
|
No, can't say that's ever happened. I did replace the cap the breather came with for one I picked up at Pep Boys (the one in the picture) and it's a tight fit.
Ah! thanks. Do you know what the cap was from so that I can try and get one from them? |
|
|
|
|
Logged
|
|
|
|
|
Sarge
|
|
« Reply #54 on: June 25, 2007, 17:20:05 pm » |
|
Ah! thanks. Do you know what the cap was from so that I can try and get one from them?
Hmmm...no clue. I've had that for a couple of years. As I recall, I just looked in the "chrome dress-up" dept and there it wuz! |
|
|
|
|
Logged
|
DKP III
|
|
|
|
Diederick/DVK
|
|
« Reply #55 on: June 25, 2007, 21:53:53 pm » |
|
very very nice sarge!!
does anyone recognise this engine bay?
very '70ies innit?
|
|
|
|
|
Logged
|
Diederick
-
Proud member of:
DVK ~ Der Vollgas Kreuzers
|
|
|
|
JeePee/DVK
|
|
« Reply #56 on: June 25, 2007, 22:02:31 pm » |
|
very very nice sarge!!
does anyone recognise this engine bay?
very '70ies innit?
Yes it is the 03 with polished fuchsen. |
|
|
|
|
Logged
|
Type 1 1964 2276cc IDA with Berg-5
|
|
|
|
stealth67vw
|
|
« Reply #57 on: June 25, 2007, 22:02:51 pm » |
|
very very nice sarge!!
does anyone recognise this engine bay?
very '70ies innit?
John Dean's 1303 Super "Thumper". 1776, Engle 130 rated at 150hp. |
|
|
|
|
Logged
|
John Bates
JB Machining Services
1967 street bug 2020lbs w/driver
12.34 @ 108 mph 1/4
7.76 @ 89mph 1/8
|
|
|
|
Shubee2 (DSK)
|
|
« Reply #58 on: June 25, 2007, 22:20:37 pm » |
|
I always Liked the look of this motor Clean and Mean
|
|
|
|
|
Logged
|
Der Selten Kafers VW Club.
Founding Member Est: 1976
58 Ragtop Old School Cal Look
66 Cal Look Drag Car
67 Resto Cal Look
67 Chevy II Nova L79
02 Camaro Vert!
04 Corvette Vert!
04 Colorado Pickup
|
|
|
|
Roman
|
|
« Reply #59 on: June 26, 2007, 12:44:11 pm » |
|
My 2.8 liter type 1, 286 hp pump gas street engine.
Sorry for the bad quality, it's a cell phone camera and it is indoors in my dark garage without a flash.
|
|
|
|
« Last Edit: June 26, 2007, 12:45:58 pm by Roman »
|
Logged
|
|
|
|
|
The Cal-look Lounge
Author
