Mark Pascoe’s 1776cc Ti Valve wanted

[Paul Bate]

I’m currently re-building Mark Pascoe’s Drag Oval 1776cc Engine.

It has a bent Titanium valve which we think was a Bugpack, they no longer stock them.

Has anyone got one or know where I could get one, the spec is:

37.5mm Diameter
8mm Valve Stem
113.3mm Long
It has a flat bottom as per the photo

Thanks for any help

Paul [ Attachment: You are not allowed to view attachments ]

[leec]

Hi Paul,

Sure you have used google, but after a quick search are these any good?

https://vwparts.aircooled.net/Titanium-Racing-Valve-Type-1-Based-Engines-Each-p/4059t1.htm

Lee

[Bruce]

A lathe with a collet, a dial indicator, and a small brass hammer. Reface when finished.

[Fastbrit]

Titanium valves can be straightened, as Bruce suggests.

[Paul Bate]

Hi Paul,

Sure you have used google, but after a quick search are these any good?

https://vwparts.aircooled.net/Titanium-Racing-Valve-Type-1-Based-Engines-Each-p/4059t1.htm

Lee

Thanks lee, I’ll take a look and see if they do a single grove version 👍🏻

[Paul Bate]

A lathe with a collet, a dial indicator, and a small brass hammer. Reface when finished.

Thanks Bruce, Marks not had a lot of luck with this engine.

I’ve now been entrusted to put it back together and don’t really want to take any risks.

Thank you for the input 😀👍🏻

[Paul Bate]

Titanium valves can be straightened, as Bruce suggests.

Thanks Keith, I hope you’re keeping well 👍🏻