The Cal-look Lounge
Welcome, Guest. Please login or register.
Did you miss your activation email?
November 10, 2024, 19:33:36 pm

Login with username, password and session length
Thank you for your support!
Search:     Advanced search
351169 Posts in 28652 Topics by 6853 Members
Latest Member: Hacksaw Racing
* Home This Year's European Top 20 lists All Time European Top 20 lists Search Login Register
+  The Cal-look Lounge
|-+  Cal-look/High Performance
| |-+  Pure racing
| | |-+  Singleport in the 11's, will be low 11's now with latest video
« previous next »
Pages: [1] Print
Author Topic: Singleport in the 11's, will be low 11's now with latest video  (Read 7021 times)
Billyisgr8
Newbie
*
Posts: 26


« on: April 30, 2010, 19:29:17 pm »

Should have posted this before for you guys from Europe. I know a few have been following my engine ever since I said anything about a turbo singleport on the other forums a few years ago.  Once I took off the holley 2 barrell and have been using the dellorto, the car has run much better, and I feel comfortable with running more than 9 psi.  Took it to 15 psi this past weekend. Still using a 73 stock irs tranny and 22 psi in my slicks. 

<a href="http://www.youtube.com/v/3ZlckHs3KAE" target="_blank">http://www.youtube.com/v/3ZlckHs3KAE</a>

« Last Edit: May 17, 2010, 05:01:32 am by Billyisgr8 » Logged
Martin Greaves
Hero Member
*****
Posts: 1740


10.88@128.58


« Reply #1 on: April 30, 2010, 20:16:50 pm »

How cool is that.

Bet you got a big  Grin on you face.
Logged

Hahaha your killing me.........
flatfire
Sr. Member
****
Posts: 441


« Reply #2 on: April 30, 2010, 21:07:47 pm »

Well done. IRS tranny, single port engine total respect. Smiley
Logged
ugly duckling
Hero Member
*****
Posts: 648



« Reply #3 on: April 30, 2010, 22:15:16 pm »

now if the titel of the thread read   ( SINGLEPORT IN THE 11'S NA)  then that would be extremly impressive. a big SNAIL on top of a flat 4 engine defenetly takes care of any inlet hole speed bumps. IT JUST DOSENT CARE. deffenetly a cheap  way to go qwic using the slg ports an all. this is what your engine is saying. OH BABY CRAM!! IT IN OH YEA!! I LIKE IT!!.   congrats on your times  Wink. UD . 
Logged

Fasterbrit
Hero Member
*****
Posts: 1009


OFF#23 - The Fastest Outlaw in the West!


« Reply #4 on: May 01, 2010, 14:17:53 pm »

Total respect! Well done and great project idea  Cool
Logged

9.563 @ 146.25 mph Cal Look Drag Day, Santa Pod, April 2011
OFF#23 OUTLAW FLAT FOUR www.outlawflatfour.com
www.air-kraft.com
www.marcomansiperformance.com
Sam K
Hero Member
*****
Posts: 746



« Reply #5 on: May 01, 2010, 14:48:22 pm »

Congratulations! I would love to see some picture of your turbo setup.
Logged
yvre
Sr. Member
****
Posts: 412


Der Autobahn Scrapers


« Reply #6 on: May 02, 2010, 13:46:38 pm »

this is what your engine is saying. OH BABY CRAM!! IT IN OH YEA!! I LIKE IT!!.

 Cheesy
Logged
herbieharv
Sr. Member
****
Posts: 298


13.5@99.5mph virgin


« Reply #7 on: May 02, 2010, 18:27:53 pm »

Congratulations! I would love to see some picture of your turbo setup.
[/quote
 
well done and me to
Logged

I keep meeting cloned mates in other country's .....I'm getting worried there might be another one of me

15.00 secs in a jumbo ... Mile high club member
Billyisgr8
Newbie
*
Posts: 26


« Reply #8 on: May 03, 2010, 05:48:57 am »


Raced 1/8 mile today and knocked off more ET and added more MPH to my 1/8 mile times.

I changed out my 28mm vents in the dellorto, and put in 33mm vents.  The 33 vents gained me 2.8 mph in the 1/8 over the 28 vent size.  Same 15 pounds boost. 

Best et      - 7.529
Best Mph  -  96.23
Best 60    -  1.790

Car weighs 1850 with me in it. 

As for my turbo set-up, it has the generic 1 5/8 turbo header sold by everyone.  40 x 40 valves, heads heavely welded to accept a golf ball size port, cam similar to a engle 120 , 82 x 90.5, turbo TO4E57  .63Stage 5

Kevin

<a href="http://www.youtube.com/v/DegsvK2-fZo" target="_blank">http://www.youtube.com/v/DegsvK2-fZo</a>


Logged
Brian
Newbie
*
Posts: 16


« Reply #9 on: May 03, 2010, 06:19:07 am »

Way to spank those V8's Kevin!!!  Hard to beleive that tranny hasnt givin up yet. You better save it for the Great Canadian!
Brian.
Logged
fish
Full Member
***
Posts: 224



« Reply #10 on: May 03, 2010, 12:42:31 pm »

 "OH BABY CRAM!! IT IN OH YEA!! I LIKE IT!!."

X 2

Well done mate, you said you would do it.
Logged

Had a fight with a Magneto, it won!
ugly duckling
Hero Member
*****
Posts: 648



« Reply #11 on: May 04, 2010, 02:55:04 am »

yea X2 on the V8 SPANKIN me likey that . you must have some kind of SLIPPER CLUTCH or clutch manigment or are ya just flat out slipin. the trans will live forever like that . the v8 boys were just LOVIN/HATEN YA. use to get that all the time many moons ago.GOOD JOB . UD .
Logged

Billyisgr8
Newbie
*
Posts: 26


« Reply #12 on: May 04, 2010, 05:15:52 am »

No my new clutch doesn't slip very much at all.  Its a stage 2 with a 4 puck.  The old clutch was a HD daiken with the stage 2, that one slipped nice, but won't hold the hp.  The 4 puck is very on and off.  I am not at all used to it.  I have not had a consistant 60 ' with it yet. I bogged the car into a bucking frenzy 2 different times and wound up with a 2.5 and  2.8   60' .  I stalled the car right from the  6000 rpm 2step  start another time too and got a 3.5 60'.    I thought forsure the stock tranny would have given up right there, but nope. Still going.  I have an anti shocker and will try to get it on before the next race so I can get consistant with the launches.   Plan 2 is to up my launch rpm to 6800, air down the slicks to 15 psi, and dump the clutch, then see how long the SSC tranny lasts.
Logged
Billyisgr8
Newbie
*
Posts: 26


« Reply #13 on: May 17, 2010, 05:03:24 am »

went 1/8 mile racing today  I'm # 3293.  This is the best pass

This works out to a low to mid 11 second pass on 15 pounds boost .  I retarded my timing 15 degrees on the 2 step, so the engine could make more boost and pull the car out of the hole.  It worked on my last pass. I did no burnouts today either.   I did not put on my anti-shocker, as it is very large, and I need to be creative to fit it in, or put it on the pedals.

<a href="http://www.youtube.com/v/z2ID7rwAbXU" target="_blank">http://www.youtube.com/v/z2ID7rwAbXU</a>

« Last Edit: May 17, 2010, 06:18:17 am by Billyisgr8 » Logged
Bruce
Hero Member
*****
Posts: 1418


« Reply #14 on: May 17, 2010, 07:13:17 am »

Kevin, you gotta open your eyes at the line!  Little old ladies driving Volvos do better than 1.066s reaction times.
Logged
jamiep_jamiep
Hero Member
*****
Posts: 1587



« Reply #15 on: May 17, 2010, 13:34:55 pm »

Very Impressive!  Smiley
Logged

Billyisgr8
Newbie
*
Posts: 26


« Reply #16 on: May 17, 2010, 15:19:27 pm »

....Its a .500 tree,  Roll Eyes     Any time I have ever raced has allways been .400 pro tree.  Racing here throws me for a loop.  The 1.066 seconds is really .566 reaction time, cause they include the .500 allready in the time.   Bottom line is though I suck at .500 trees.
Logged
Tom G.
Full Member
***
Posts: 139



WWW
« Reply #17 on: May 20, 2010, 19:58:59 pm »

that all with a stock tranny Shocked Shocked Shocked unbelievable....Huh

But i it looks like you have a smooth food on the clutch....stage 2 with 4 puck thatīs a lot for a stock tranny...But perhaps an irs tranny is stronger then a swing axle tranny?


Really cool..

Logged
Pages: [1] Print 
« previous next »
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!