4" Bore Aluminium case by Jeff Denham / Shawn Geers.

[UltraOrange67-2443]

New aluminium case.

Flange seal cut and sand seal front.

Cleared for 90mm stroke.

BMW Bearing mod (bearings fitted) for use with all T4 main.

6 stud, 4 x 10mm 2 x 8mm per Cylinder (case savers fitted deep!)

Bronze thrust conversion (you will need shims to suit your crank)

all mains shuffle pinned.

To#¤ta thrust can be fitted to suit your crank for extra cost.

Lots spent.

£1000 or swap for Italian 48 IDA's.

Cheers, Nick

https://www.thesamba.com/vw/classifieds/detail.php?id=2085051&

Pics ^^^^

[leec]

What's the reason for selling? What barrels is it bored for?
Lee

[dannyboy]

4"?

[leec]

4"?

I know that, but different barrels measure outside different. Mahle and AA may be slightly different for example

[UltraOrange67-2443]

What's the reason for selling? What barrels is it bored for?
Lee

I have had both AA and Pauter machined to fit.

It is best to machine your Cylinders to fit the case.

I can get you Dia measurement on Thursday.

Change of plan 

[UltraOrange67-2443]

Lots of interest in the 4" bore case and Strip dom Heads!